Nederlands Deutsch Francais English
0
   Cart

Philips 13163/10H 250W 24V MR16 ELC A1/259

Article ID:
19100090



17 items currently in stock
New stock expected on:  
03-06-2026 After placing the order




Properties
Manufacturer's article number 8711500436863 Manufacturer's part number.
Manufacturer's article number (old) 43686330 Manufacturer's part number.
ANSI code ELC The ANSI code on a lamp or device indicates that the product meets ANSI (American National Standards Institute) standards. ANSI is an organisation that develops standards for performance, dimensions and safety. Lamps with corresponding ANSI codes are interchangeable.
Average life span 1000h The life span of a party of lamps of which 50% of the lamps will continue to function. Sometimes, incandescent or halogen lamps may become defective more quickly, but in case 50% of the lamps do still reach the lifespan, the lamps are still OK.
Brand Philips If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Colour rendering index Ra 100 Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
Colour temperature 3400K

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

Diameter 50mm Diameter in millimetres, measured at the widest point.
Lamp base GX5.3 Cap, lamp holder or lamp base type.
Length 44,5mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
LIF code A1/259 This is the code on the lamp or appliance that the lamps meet the standards LIF. LIF stands for Lighting Industry Federation. This institute developed standards for performance, safety and dimensions. Lamps with a similar LIF code are interchangeable.
Material number (12NC) 924913220540 Material number from Philips
Pieces per outer carton 10 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Voltage 24V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Wattage 250W The power that the bulb consumes. This does not include the loss of any ballast or transformer.
EAN code 8711500436863 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) 08711500436870
9249132205407
EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
Philips 13163/10H 250W 24V MR16 ELC A1/259
Downloads Your corrections
Remarks
Full name
Phone
Email address