Nederlands Deutsch Francais English
0
   Cart

Osram HTI DE


Double ended

At the end of durability (strong colour changes, difficult to start up
or on/off), replace the lamp on time to prevent defects to the ballast.

These lamps work in combination with a ballast, therefore it is not possible
to exchange different powers.

Prices are exclusive waste disposal fee.
Prices are exclusive of VAT.
Osram HTI DE
Filters
Filter on:
Either show items that are in stock or items that are not in stock.
? The life span of a party of lamps of which 50% of the lamps will continue to function. Sometimes, incandescent or halogen lamps may become defective more quickly, but in case 50% of the lamps do still reach the lifespan, the lamps are still OK.
? Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
?

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

? Diameter in millimetres, measured at the widest point.
? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
? The power that the bulb consumes. This does not include the loss of any ballast or transformer.
Luminous flux
>
>
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).

Brand: Osram
Lamp base: SFC10-4

7 products     1  


Osram Baby SharXS HTI 250W D3/80 SFc10-4 8000K

 

Expected 11-06-2026
Osram Baby SharXS HTI 300W D5/65 SFc10-4 6500K

 

Expected 12-06-2026
Osram SharXS HTI 1200W D7/60 SFc10-4 6900K

 

Expected 11-06-2026
Osram SharXS HTI 1200W D7/75 SFc10-4 8800K

 

Expected 11-06-2026
Osram SharXS HTI 1500W D7/60 SFc10-4 6000K

 

Expected 11-06-2026
Osram SharXS HTI 400W D3/75 SFc10-4 7500K

 

Expected 11-06-2026
Osram SharXS HTI 700W D4/75 SFc10-4 7500K

 

Expected 11-06-2026
You've viewed 7 of 7 items

7 products     1