Philips railspot MRS261 SDW-TG 50W 825 3f grijs Armatuur met geïntegreerd elektronisch voorschakelapparaat (EVSA) voor gasontladingslamp met universele 3f railadaptor voor 3 fase spanningsrail. Levering met Philps SDW-TG 50W kleur 825 lichtbron.
Properties
Downloads
Your corrections
| Manufacturer's article number | 81116199 | ? Manufacturer's part number. |
| Ballast | Electronic | ? A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life. |
| Base version | 3 phase universal adapter |
?
The foot may have been different versions. The 1 circuit track adapter is brand specific. The 3 phase track adapter is universal and applicable to most brands rail. |
| Brand | Philips | ? If the product is unbranded, we do not have a regular supplier for it. Therefore, the product version may slightly vary. |
| Colour | Grey | ? Most common colour in the product. |
| Colour rendering index Ra | 81 |
?
Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100. Ra = 90-100 excellent colour rendering properties Ra = 80-90 good colour rendering properties Ra = 60-80 moderate colour rendering properties Ra <60 poor colour rendering properties Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower. |
| Dimmable | No | ? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department. |
| Lamp base | GX12-1 | ? Cap, lamp holder or lamp base type. |
| Lamp included | Yes | ? Luminaire including or excluding lamp(s). |
| Light source | SDW-TG | ? Type of lamp that fits in the luminaire. In some cases, several types of lamps can be used in one luminaire. |
| Luminaire application | Indoor | ? Application of the luminaire depending on the environment. For example, an indoor fitting cannot be used outdoors. An outdoor luminaire, on the other hand, could be used indoors, but may be less suitable here, fore example because it provides too much light or is aesthetically unsuitable. |
| Luminaire type | Track 230V 3 phase | ? Type of luminaire application. |
| Pieces per outer carton | 4 | ? Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount. |
| Suitable for number of lamps | 1 | ? The number of lights that the luminaire can contain. Most luminaires are supplied without lamps. If lamps are included can be found in filter property Lamp included. |
| Voltage | 230V | ? This may be either a fixed voltage or two values, in which case the product can be used within these limits. |
| Wattage | 50W | ? The power that the bulb consumes. This does not include the loss of any ballast or transformer. |
| EAN code | 8711559811161 | ? EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing. |
| EAN code (extra) | ? EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing. |
Philips railspot MRS261 SDW-TG 50W 825 3f grijs
Armatuur met geïntegreerd elektronisch voorschakelapparaat (EVSA) voor gasontladingslamp met universele 3f railadaptor voor 3 fase spanningsrail. Levering met Philps SDW-TG 50W kleur 825 lichtbron.
Armatuur met geïntegreerd elektronisch voorschakelapparaat (EVSA) voor gasontladingslamp met universele 3f railadaptor voor 3 fase spanningsrail. Levering met Philps SDW-TG 50W kleur 825 lichtbron.
Download productinformatieblad
