Nederlands Deutsch Francais English
0
   Cart

Tridonic TMDD 60 A601W 60W 12V trafo conventioneel met trekontlasting

Article ID:
29100090

Discontinued


Properties
Manufacturer's article number 24030650 Manufacturer's part number.
Ballast Conventional transformer A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Brand Tridonic If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Connection output 1 x screwterminal Connection type of the output.




Connection power input Screwclamp

The way the power can be connected.

Dimmable Yes, L dimmer (Conventional transformer) Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Height 41,1mm Maximum height in millimetres.
Input voltage 230V
This may be a fixed voltage or two values ​​with a hyphen.
You can use the product within these limits.
Length 202mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Maximum wattage 60W Maximum amount of power, expressed in watts, that can be connected to the transformer in order to work properly. If the assets exceed this maximum amount, the transformer may behave abnormally: known phenomena in electronic transformers are the lights switching on and off, and no output voltage.
Minimum wattage 45W The minimum power must be connected to the transformer to work properly. If the assets are below the transformer behave abnormally. Known phenomena are electronic transformers are flashing lights, brighter and fainter burning lamps and no output voltage.

A conventional wound transformer must be at least 75% of the maximum power charge. If the load is below this limit, the output voltage too high making the lamps extremely much shorter life. The color of the lamps is usually very white.
Output voltage 12V AC (alternating current) The output voltage is indicated here. Voltage-controlled LEDs must always be connected in parallel.
Pieces per outer carton 1 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Shape Oblong Product shape.
Voltage 230V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Width 46mm Maximum width in millimetres.
Tridonic TMDD 60 A601W 60W 12V trafo conventioneel met trekontlasting
Downloads Your corrections
Remarks
Full name
Phone
Email address