Vossloh Schwabe 164572 LN18.510 vsa
| Manufacturer's article number | 164572 | ? Manufacturer's part number. |
| Ballast | Conventional | ? A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life. |
| Ballast version | Coil |
?
Version of the ballast. |
| Brand | Vossloh Schwabe | ? If the product is unbranded, we do not have a regular supplier for it. Therefore, the product version may slightly vary. |
| Dimmable | No | ? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department. |
| Height | 28mm | ? Maximum height in millimetres. |
| Length | 155mm |
?
Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated. |
| Pieces per outer carton | 10 | ? Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount. |
| Shape | Oblong | ? Product shape. |
| Suitable for 2D 2p | 1x28W | ? Suitable for PL-Q 2 pin, CFL Square 2 pin, 2 pin 2D lamps. Only lamps with the specified wattage and number can be applied. Other combinations will not work. |
| Suitable for 2D 4p | 1x28W |
?
Suitable for PL-Q 4-pin CFL Square 4 pin, 4 pin 2D lamps. You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for PL-C 2p | 1x18W |
?
Suitable for PL-C 2 Pin, Dulux D, Biax D Lynx CF-D lamps. You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for PL-L 4p | 1x18W |
?
Suitable for PL-L 4, L Dulux, Biax L, Lynx CF-L lamps. You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for TL 26mm | 1x14W, 1x18W | ? Suitable for TL-D, L Lumilux, T8 Polylux, Luxline T8 fluorescent tubes. You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for TL 38mm | 1x20W |
?
Suitable for old "thick" T12 TL fluorescent tubes of 38mm. You can only use lamps with the specified wattage and number. Other combinations will not work.
|
| Voltage | 230V | ? This may be either a fixed voltage or two values, in which case the product can be used within these limits. |
| Width | 41mm | ? Maximum width in millimetres. |
Download productinformatieblad
