Vossloh Schwabe 506118 NaHJ 70.158 230-240V met losse ontsteker toepassen
Properties
Downloads
Your corrections
| Manufacturer's article number | 506118 | ? Manufacturer's part number. |
| Ballast | Conventional | ? A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life. |
| Ballast version | Coil |
?
Version of the ballast. |
| Brand | Vossloh Schwabe | ? If the product is unbranded, we do not have a regular supplier for it. Therefore, the product version may slightly vary. |
| Dimmable | No | ? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department. |
| Height | 53mm | ? Maximum height in millimetres. |
| Length | 108mm |
?
Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated. |
| Pieces per outer carton | 1 | ? Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount. |
| Suitable for CDM/CDO-ET/TT | 1x70W | ? You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for CDM-R | 1x70W | ? You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for CDM-R111 | 1x70W | ? You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for CDM-T | 1x70W | ? You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for CDM-TC | 1x70W | ? You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for CDM-TD | 1x70W | ? You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for HQI | 1x70W | ? You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for SON | 1x70W | ? You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Voltage | 230V-240V | ? This may be either a fixed voltage or two values, in which case the product can be used within these limits. |
| Width | 66mm | ? Maximum width in millimetres. |
Vossloh Schwabe 506118 NaHJ 70.158 230-240V met losse ontsteker toepassen
Download productinformatieblad
