Nederlands Deutsch Francais English
0
   Cart

SLV elektronisch voorschakelapparaat HQI/CDM 150W 470380 309355

Article ID:
29105028

Discontinued


Properties
Manufacturer's article number 470380 Manufacturer's part number.
Appliance class Class I (earthed)

In the electrical appliance manufacturing industry, the following IEC protection classes are used to differentiate between the protective-earth connection requirements of devices.

Class I

These appliances must have their chassis connected to electrical earth (ground). This earth conductor is coloured green/yellow in most countries (green in US, Canada and Japan)

           

Class II

These appliances are double insulated. It has been designed is such a way that is does not require a safety connection to electrical earth (ground)

                                     

Class III

These appliances are designed to be supplied from a separated/safety extra-low voltage (SELV) power source maximum 50V (Volt) AC alternating current. The voltage from a SELV supply is low enough that under normal conditions a person can safely come into contact with it without risk of electrical shock.

              

 

Ballast Electronic A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Ballast version Surface-mounted with strain relief

Version of the ballast.

Brand SLV If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Dimmable No Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Height 36mm Maximum height in millimetres.
Length 192mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Old article number 309355 Old part number of the manufacturere. By renumbering, each SLV article has a new Europian part number.
Pieces per outer carton 1 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Suitable for CDM-T 1x150W You can only use lamps with the specified wattage and number. Other combinations will not work.
Suitable for CDM-TD 1x150W You can only use lamps with the specified wattage and number. Other combinations will not work.
Suitable for HQI 1x150W You can only use lamps with the specified wattage and number. Other combinations will not work.
Voltage 230V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Width 87mm Maximum width in millimetres.
EAN code 4024163093552 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
SLV elektronisch voorschakelapparaat HQI/CDM 150W 470380 309355
Downloads Your corrections
Remarks
Full name
Phone
Email address