37, 8, 372,
Nederlands Deutsch Francais English
0
   Cart
0
Home Assortment Account Quick-order Order upload Customer service Contact
Nederlands Deutsch Francais English




Products

Discontinued items


Prices are exclusive waste disposal fee.

Prices are exclusive of VAT.
Discontinued items
Filters
Filter on:
?  Either show items that are in stock or items that are not in stock.
? The ANSI code on a lamp or device indicates that the product meets ANSI (American National Standards Institute) standards. ANSI is an organisation that develops standards for performance, dimensions and safety. Lamps with corresponding ANSI codes are interchangeable.
? These lamps can be applied directly to mains voltage 230V AC (alternating current)
? These lamps can be applied on a conventional ballast (wounded coil, choke or magnetic ballast).
? These lamps can be applied with an electronic ballast (EVSA or HF ballast). Consult the manufacturer's compatibility lists to check whether the combination is compatible.
? These lamps can be applied to an LED driver. Please note the manufacturer's specifications for the correct current value.
? The life span of a party of lamps of which 50% of the lamps will continue to function. Sometimes, incandescent or halogen lamps may become defective more quickly, but in case 50% of the lamps do still reach the lifespan, the lamps are still OK.
? A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
?

Version of the ballast.
? The foot may have been different versions. The 1 circuit track adapter is brand specific.
The 3 phase track adapter is universal and applicable to most brands rail.
? The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area.
For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
? If the product is unbranded, we do not have a regular supplier for it. Therefore, the product version may slightly vary.
?

Luminaire or lamp has a built-in motion detector. The light will switch on when a movement is detected.
? Luminaire or lamp holder is equipped with a switch.
?

Luminaire or lamp has a twilight switch function. This automatically switches on the lights as it gets dark.
?

Ballasts that include an ignitor to start the HID lamp are limited in the distance between ignitor / ballast and lamp. This capacity in pF may not be higher than the maximum value. A typical value for cable is 100pF/meter.
? Connecting cable length in metres.
? The value of a capacitor, expressed in uF (microfarads).
? Carrying surface can vary, such as matt or glossy.
? Most common colour in the product.
? Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value:
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
The last 2 digits are for colour temperature.
The higher the colour temperature, the cooler the impression of light.
Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere.
Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light.
2700K extra warm white
3000K warm white
3500K neutral white
4000K cool white
5000-5500K daylight
6000K cool daylight
? Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
?

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.
? Articles classified by component type.
? Connection type of the output.
?

The way the power can be connected.
? The way the power can be tapped for looping through.
? Number of hours after which 10% of the lamps have been interrupted when using a conventional (wound with copper wire, not electronic) ballast.
? Number of hours after which 50% of the lamps have been interrupted when using a conventional (wound with copper wire, not electronic) ballast.
? A front glass has the advantage that the inner reflector cannot contaminate it.
Some lamps have a matte or coloured glass front.
? Length of the cover in (milli)metres.
?

Material of which the cover of the product is made.

A Polycarbonate (PC) cover is mechanically much stronger (impact resistant) but less chemically resistant to a number of substances. For general purposes, this is a good choice.

Acrylic (PMMA)  is robust but more resistant to eg hydrochloric acid> 20%, formic acid, 10% nitric acid, ammonia (liquid), often used in piggeries and car washes.
?

The surface area of ​​the core (mm2).
? Depth in millimetres.
? Diameter in millimetres, measured at the widest point.
?

Dim to warm is a dimming technique that adjusts colour temperature as the light is dimmed: it shifts from warm white to extra warm white when fully dimmed. This technique has various names, such as Dimtone or Glowdim.
? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
? Not every dimmable ballast or light source can dim to 0% level, here is the dimming range.
? Earthing connection available.
? This is the code for car lamps to indicate that they comply with European legislation. Lamps with the same ECE code are interchangeable.
? Number of hours with 10% of the lamps has been interrupted by application of an electronic (or HF) ballast.
? If a luminaire has an emergency function, the autonomy time is indicated here.
? The way the suspension of the filament is made. Ordinary light bulbs have a standard suspension. Reinforced construction lights are equipped with additional mounting points for the glow wire, ​​making the light more resistant to vibration. These lamps can be applied on handlamps, trains, boats and other places with a lot of vibration, such as machinery and wooden floors. These lamps can also be used without problems at home.
? The diameter of the flange measured at the widest point.
? The thickness of the flange measured at its thickest point.
? Glass colour.
? Kleur van de verstelbus.
? Many lamps are available in 2 versions: heat forwards or heat backwards. Please note the user manual of the fixture!
? Maximum height in millimetres.
? Height adjustable on the track bracket.
? LED fixture with an extra high light output
? The size of the hole you can build in the fixture.
? Ignition voltage of the ballast or lamp in kV.
? Inner cable colour.
?
This may be a fixed voltage or two values ​​with a hyphen.
You can use the product within these limits.
? Inside diameter for round items.
?

The IP (Ingress Protection) code indicates the degree of protection against ingress of moisture and solid objects. The code consists of two firures.
The first figure indicates the protection against objects and dust:
IP 0x - not protected
IP 1x - protected against objects with a diameter above 50 mm
IP 2x - protected from objects with a diameter greater than 12 mm (touch safe)
IP 3x - protected from objects with a diameter greater than 2.5 mm
IP 4x - protected against objects with a diameter greater than 1 mm
IP 5x - protected against dust ( dust )
IP 6x - dustproof

The second figure indicats the protection against water:
IP x0 - unprotected (plain)
IP x1 - Protected against dripping water (drip)
IP x2 - Protected against dripping water when tilted to 15 degrees
IP x3 - protected against spraying water (rain tight)
IP x4 - protected against splashing water (splash proof)
IP x5 - protected against water jets (splashproof)
IP x6 - protected from rainstorms
IP x7 - protected against accidental immersion (30 minutes to 1 meter deep) (waterproof)
IP x8 - protected from stay under water (pressure proof)
? For many applications, there are special lamps. Maybe your application there and there is a more suitable lamp available.
? Cap, lamp holder or lamp base type.
? The current of the lamp or ballast lamp in A (Ampère).
? Lamp holder version: either smooth, external thread or external thread with flange.
? Luminaire including or excluding lamp(s).
? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
? Length of cord between plug and switch in metres.
? Length of cord between switch and end of cord in metres.
? This is the code on the lamp or appliance that the lamps meet the standards LIF. LIF stands for Lighting Industry Federation. This institute developed standards for performance, safety and dimensions. Lamps with a similar LIF code are interchangeable.
? Type of lamp that fits in the luminaire. In some cases, several types of lamps can be used in one luminaire.
? The amount of light as a percentage that is transmitted through the material.
? Application of the luminaire depending on the environment. For example, an indoor fitting cannot be used outdoors. An outdoor luminaire, on the other hand, could be used indoors, but may be less suitable here, fore example because it provides too much light or is aesthetically unsuitable.
? Type of luminaire application.
? Version can vary, , for example left or right variant, with frame or without frame ( trimless, frameless or no frame).
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
? The light flux that is emitted in a certain direction. The unit of luminous intensity is the candela (cd).
? Colour of the M6 coupler which is mounted op suspended ceiling clip.
? Material of which the major part of the product is made.
? Maximum amount of power, expressed in watts, that can be connected to the transformer in order to work properly. If the assets exceed this maximum amount, the transformer may behave abnormally: known phenomena in electronic transformers are the lights switching on and off, and no output voltage.
? The minimum power must be connected to the transformer to work properly. If the assets are below the transformer behave abnormally. Known phenomena are electronic transformers are flashing lights, brighter and fainter burning lamps and no output voltage.

A conventional wound transformer must be at least 75% of the maximum power charge. If the load is below this limit, the output voltage too high making the lamps extremely much shorter life. The color of the lamps is usually very white.
?  The dimensions or art of the mounting hole or thread. Note M8x1, M10x1 and  M13x1 are fine metric and not eqal to the standard thread!
? Number of wires in the cable or cord.
? Number of modules of 18mm width, which is the standard size for DIN track components.
? Number of poles of the component. A switchable neutral is not protected.
? The life span of a lamp may be limited by the number of switch cycles, which is the number of times a lamp can be switched on and off before it becomes defective.
? Each type of LED requires a different driver. Current-controlled LEDs of 350, 700, 1050 and 1400mA need to be connected in series. This can be easily done with an LED distributor. Unused outputs are shorted with a wire . First connect the wires, then you can put power on! Never disconnect wires under power!
? The output voltage is indicated here. Voltage-controlled LEDs must always be connected in parallel.
? Outside diameter for round items.
? Outside Dimension is the largest size, often of the lamp head.
? Premium White gives the best possible light quality for fashion shops and supermarkets.
? Equipped with plastic coating, which holds together the lamp components and glass in the event of breakage.
Suitable for the HCCP and ISO 22000 standard.
Applied to places where lamp rupture may cause damage to products or processes. The coating has a lower UV radiation.
? With quick mounting, the rail bracket can be mounted easily without tools.
? The highest value of the short-circuit current that the component can shut.
? The nominal current of the product in A (Ampère). 1A = 1000mA.
? The required recessed height behind the luminaire. More space is often needed due to heat development and tilting of the luminaire.
? Length of the reel in metres.
? The type of reflector which is in the armature located. For TL-D luminaires matt the most applied, dirt on the reflector is not or hardly seen. For T5 fixtures is a high gloss reflector optical much nicer, the luminaire is less seen. In the LTS fittings with SDW-T or SDW-TG lamps for the bakery in the past is often used a gold reflector for a warmer color. For expansion with existing fixtures would be an option. We prefer a silver reflector with possibly a bakery filter because much less distortion of the color displays compared to a gold reflector.
? Een borging zorgt ervoor dat de verstelbus pas versteld kan worden als de borging is losgedraaid. Na losdraaien kan de verstelnippel ingedrukt worden. Als de juiste hoogte is ingesteld, kan de borging weer worden vastgedraaid. Dit is een extra beveiliging.
? Product shape.
? Ballasts come in a cold and warm start. Cold start is slightly more energy efficient but has the disadvantage that it only up to 3x per day may change, otherwise it is defective.
Warm start is today the most widely used.
? Suitable for PL-Q 4-pin CFL Square 4 pin, 4 pin 2D lamps.
You can only use lamps with the specified wattage and number. Other combinations will not work.
? Suitable for Baro BFL Mini lamps.
You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
?

Note Philips has an ignition voltage of 1.5 kV, General Electric and Sylvania 4kV, therefore these are not interchangeable. You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
?
Special ceiling sockets are available for sloped ceilings.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
?

Note General Electric and Sylvania have an ignition of 4kV, Philips 1.5 kV, therefore these are not interchangeable.       You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? The number of lights that the luminaire can contain. Most luminaires are supplied without lamps. If lamps are included can be found in filter property Lamp included.
? Suitable for PL-C 4 Pin, Dulux D / E, Biax D / E, Lynx CF-DE lamps.                                                                          You can only use lamps with the specified wattage and number. Other combinations will not work.
?

Suitable for PL-L 4, L Dulux, Biax L, Lynx CF-L lamps.                                                                                               You can only use lamps with the specified wattage and number. Other combinations will not work.

?

Suitable for PL-R 4-pin Dulux T / E HE High Efficiency GR14q-1 lamps.                                                    You can only use lamps with the specified wattage and number. Other combinations will not work.

? Suitable for PL-S 2 Pin, Dulux , Biax , Lynx CF- lamps.                                                                                              You can only use lamps with the specified wattage and number. Other combinations will not work.
? Suitable for PL- 4-pin Dulux / E, Biax / E, Lynx CF-SE lamps.                                                                                    You can only use lamps with the specified wattage and number. Other combinations will not work.
? Suitable for PL-T 4 Pin, Dulux T / E, Biax T / E, CF Lynx-TE lamps.                                                                               You can only use lamps with the specified wattage and number. Other combinations will not work.
? Suitable for SDW-T lamps.
You can only use lamps with the specified wattage and number. Other combinations will not work.
?

Suitable for SDW-TG lamps.
You can only use lamps with the specified wattage and number. Other combinations will not work.

? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
?

This component is suitable for steel wire diameters that fall within this range.
? Suitable for TL-D, L Lumilux, T8 Polylux, Luxline T8 fluorescent tubes.                                                                        You can only use lamps with the specified wattage and number. Other combinations will not work. 
?

Suitable for old "thick" T12 TL fluorescent tubes of 38mm.                                                                                        You can only use lamps with the specified wattage and number. Other combinations will not work. 
?

Suitable for TL5 and TL5 HE HO, T5 FH and FQ T5, T5 and T5 FHE FHO, High Efficency T5 and T5 High Output lamps.     You can only use lamps with the specified wattage and number. Other combinations will not work. 

At the specified output has gone out of the standard length of the lamps.

14W and 24W 549mm

21W and 39W 849mm

28W and 54W 1149mm

35W, 49W and 80W 1449mm

Special sizes for aquariums will not work.
? Suitable for TL5 Circular, T5 FC lamps.                                                                                                                   You can only use lamps with the specified wattage and number. Other combinations will not work. 
? Dit merk en type spanningsrail kunnen met dit onderdeel worden gemonteerd.
? Length of the supplied pendant or steel wires.
? Specification of thread. Note M8x1, M10x1 and  M13x1 are fine metric and not eqal to the standard thread!
? Thread length in millimetres.
? Specification of the tread of a lampholder or screw ring.
? The thread can be either internal (inside thread) or external (oudside thread).
? Number of cores and conductor cross-section of the internal wiring for quick and easy interconnection of fixtures with a cable.
? The number of degrees that the fixture can be tilted vertically.
? The brand of the bracket that will be placed on the lighting track. We make assemblies in different versions with different brands of rail brackets.
? Colour of the bracket that will be placed on the lighting track.
? The characteristic of fuses can be fast (F) or slow (T).
? Many lamps have a UV filter against discolouration. This filter is often recognisable as a bluish glow over the lamp. If a lamp has a UV filter, this is indicated on its packaging and, in most cases, also on the lamp itself.
? This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
? The power that the bulb consumes. This does not include the loss of any ballast or transformer.
? Replacement bulb power specified by the manufacturer. A CFL and LED display average 5x as much light compared to a standard bulb. To the CFL or LED power available divide the bulb power by 5.
? Maximum width in millimetres.
Height
>
>
? Maximum height in millimetres.
Luminous flux
>
>
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
Width
>
>
? Maximum width in millimetres.


1309 products     1 2 3 4 5 6 7


Philips Master PL-S 7W 827 4P Incandescent White 2G7 26070370
10100250 :: show details
Philips Master PL-S 7W 827 4P Incandescent White 2G7

 
login to order

Only 34 items in stock

Last stock
TCI 122411 DC Maxi Jolly US 1-10V push and dim multifunctionele LED driver
29101265 :: show details
TCI 122411 DC Maxi Jolly US 1-10V push and dim multifunctionele LED driver


replaced by: Article 29101267
 
login to order

Only 4 items in stock

Last stock
TCI 122420 DC Jolly 1-10V push and dim multifunctionele LED driver
29100161 :: show details
TCI 122420 DC Jolly 1-10V push and dim multifunctionele LED driver

 
login to order

Only 14 items in stock

Last stock
Thorgeon AR48 12V Halospot 48 41900 SP 20W 12V 8°
11000954 :: show details
Thorgeon AR48 12V Halospot 48 41900 SP 20W 12V 8°


replaced by: Article 11000961
 
login to order

Only 25 items in stock

Last stock
PIL Lumis 15-00419 Acro XS T8 2x58W HF (EVSA) dimbaar 1-10V TL opbouwarmatuur IP65 stootvaste acrylaat (PMMA) afdekkap met RVS clips
24000483V :: show details
PIL Lumis 15-00419 Acro XS T8 2x58W HF (EVSA) dimbaar 1-10V TL opbouwarmatuur IP65 stootvaste acrylaat (PMMA) afdekkap met RVS clips

 
Aansluitsnoer met platte 3 polige female stekker kort 3x0,75mm2 wit voor ombouw vsa naar lamp
71300821 :: show details
Aansluitsnoer met platte 3 polige female stekker kort 3x0,75mm2 wit voor ombouw vsa naar lamp

 
login to order

Only 194 items in stock

Last stock
Apparaatsnoer 3x0,75mm met haakse stekker 10A IEC-320-C13 2m zwart
72400429 :: show details
Apparaatsnoer 3x0,75mm met haakse stekker 10A IEC-320-C13 2m zwart

 
login to order

Only 13 items in stock

Last stock
BJB 26745240150 lamphouder G24 GX24 10W - 42W 4p zonder slot voor het lampvermogen
29100985 :: show details
BJB 26745240150 lamphouder G24 GX24 10W - 42W 4p zonder slot voor het lampvermogen kan elk vermogen lamp in tussen 10W en 42W 4 pins

 
login to order

Only 2 items in stock

Last stock
BJB opsteekkap M8x1 toepassen in combinatie met lamphouder GY6.35 12V 35W
29100303 :: show details
BJB opsteekkap M8x1 toepassen in combinatie met lamphouder GY6.35 12V 35W zie accessoires

 
login to order

Only 5 items in stock

Last stock
BLV HIT-DE 70W RX7s 220501 CW 10000K
12900170 :: show details
BLV HIT-DE 70W RX7s 220501 CW 10000K

 
login to order

Only 4 items in stock

Last stock
BLV Ultralife 187052 halogeenlamp 50mm 50W 12V 24°
11002625 :: show details
BLV Ultralife 187052 halogeenlamp 50mm 50W 12V 24°

 
login to order

Only 42 items in stock

Last stock
Bailey halogeenlamp 50mm MR16 50W GU5.3 230V 20° Let op 230V
11101209 :: show details
Bailey halogeenlamp 50mm MR16 50W GU5.3 230V 20° Let op 230V

 
login to order

Only 4 items in stock

Last stock
Berker CAI antennedoos 2 gats einddoos basiselement
72901065 :: show details
Berker CAI antennedoos 2 gats einddoos basiselement

 
login to order

Only 6 items in stock

Last stock
Berker S.1 wandcontactdoos 2 voudig met randaarde vertikaal met volle afdekplaat voor 1 inbouwdoos conform DIN 49073-1 zonder spreidklemmen cremewit RAL1013 glanzend
72901068 :: show details
Berker S.1 wandcontactdoos 2 voudig met randaarde vertikaal met volle afdekplaat voor 1 inbouwdoos conform DIN 49073-1 zonder spreidklemmen cremewit RAL1013 glanzend

 
login to order

Only 10 items in stock

Last stock
Berker S.1 wandcontactdoos 2 voudig met randaarde vertikaal met volle afdekplaat voor 1 inbouwdoos conform DIN 49073-1 zonder spreidklemmen polarwit RAL9010 glanzend
72901054 :: show details
Berker S.1 wandcontactdoos 2 voudig met randaarde vertikaal met volle afdekplaat voor 1 inbouwdoos conform DIN 49073-1 zonder spreidklemmen polarwit RAL9010 glanzend

 
login to order

Only 2 items in stock

Last stock
Berker S.1, B.1, B.3, B.7, glas inzetplaat 3 standen zonder 0 stand met draaiknop cremewit RAL1013 glanzend
72901008 :: show details
Berker S.1, B.1, B.3, B.7, glas inzetplaat 3 standen zonder 0 stand met draaiknop cremewit RAL1013 glanzend

 
login to order

Only 5 items in stock

Last stock
Berker S.1, B.1, B.3, B.7, glas inzetplaat 3 standen zonder 0 stand met draaiknop polarwit RAL9010 glanzend
72901049 :: show details
Berker S.1, B.1, B.3, B.7, glas inzetplaat 3 standen zonder 0 stand met draaiknop polarwit RAL9010 glanzend

 
login to order

Only 5 items in stock

Last stock
Berker UAE doos mod jack 2 voudig 45° cat.5e afgeschermd datacommunicatie basiselement
72901064 :: show details
Berker UAE doos mod jack 2 voudig 45° cat.5e afgeschermd datacommunicatie basiselement

 
login to order

Only 4 items in stock

Last stock
Berker dimmer 20-360W Tronic inbouw druk draai dimmer met wisselschakelaar
72900630 :: show details
Berker dimmer 20-360W Tronic inbouw druk draai dimmer met wisselschakelaar

 
login to order

Only 4 items in stock

Last stock
Berker dimmer 60-400W gloeilamp inbouw druk draai dimmer met wisselschakelaar
72901066 :: show details
Berker dimmer 60-400W gloeilamp inbouw druk draai dimmer met wisselschakelaar

 
login to order

Only 6 items in stock

Last stock
Prices ex. shipping & handling
You've viewed 20 of 1309 items

1309 products     1 2 3 4 5 6 7

© 2026 First Light B.V.
0
Home
Customer service About First Light Placing orders and payment Shipping and handling costs Pick-up orders VAT free deliveries on international orders Returns Opening hours Useful tips Waste disposal fee Privacy and Safety Disclaimer Terms and conditions Contact Directions FAQ
Account Log in Forgot password Customer registration
Technical info Halogen lamps Colour codes IP rating
Sitemap




First Light B.V.

De Beverspijken 5a
5221 EE 's-Hertogenbosch
Nederland


T: +31(0)73 6235085
E: verkoop@firstlight.nl

W: www.firstlight.nl


KvK: 17130112
BTW: NL809348135B01

iDEAL | Wero logo Bancontact / MisterCash logo Visa logo Mastercard logo Maestro logo Trustly logo Apple Pay logo Transmission logo GLS logo