Nederlands Deutsch Francais English
0
   Cart
0
Home Assortment Account Quick-order Order upload Customer service Contact
Nederlands Deutsch Francais English

Apple Pay logo Visa logo Mastercard logo Bancontact / MisterCash logo Giropay logo Sofort Ueberweisung logo ING HomePay KBC Belfius Trustly logo     iDEAL logo Rabobank logo ING logo ABN-AMRO logo SNS logo Frieslandbank logo Van Lanschot logo ASN logo Deutsche Bank logo Triodos logo     UPS logo



Products

Out of stock

Several products which are not longer available.
Prices are exclusive of VAT.

Out of stock
Filters
Filter on:
?  Either show items that are in stock or items that are not in stock.
? The ANSI code on a lamp or device indicates that the product meets ANSI (American National Standards Institute) standards. ANSI is an organisation that develops standards for performance, dimensions and safety. Lamps with corresponding ANSI codes are interchangeable.
? These lamps can be applied directly to mains voltage 230V AC (alternating current)
? These lamps can be applied on a conventional ballast (wounded coil, choke or magnetic ballast).
? These lamps can be applied with an electronic ballast (EVSA or HF ballast). Consult the manufacturer's compatibility lists to check whether the combination is compatible.
? These lamps can be applied to an LED driver. Please note the manufacturer's specifications for the correct current value.
? De uitvoering van de bevestiging.
? The life span of a party of lamps of which 50% of the lamps will continue to function. Sometimes, incandescent or halogen lamps may become defective more quickly, but in case 50% of the lamps do still reach the lifespan, the lamps are still OK.
? A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
?

Version of the ballast.
? The foot may have been different versions. The 1 circuit track adapter is brand specific.
The 3 phase track adapter is universal and applicable to most brands rail.
? Battery capacity in Ah (1Ah = 1000mAh).
? The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area.
For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
? If the product is unbranded, we do not have a regular supplier for it. Therefore, the product version may slightly vary.
?

Luminaire or lamp has a built-in motion detector. The light will switch on when a movement is detected.
? Luminaire or lamp holder is equipped with a switch.
?

Luminaire or lamp has a twilight switch function. This automatically switches on the lights as it gets dark.
?

Ballasts that include an ignitor to start the HID lamp are limited in the distance between ignitor / ballast and lamp. This capacity in pF may not be higher than the maximum value. A typical value for cable is 100pF/meter.
? Finishing of the cable end.
? Connecting cable length in metres.
? The value of a capacitor, expressed in uF (microfarads).
? Carrying surface can vary, such as matt or glossy.
? Most common colour in the product.
? Kleur van de verstelbus.
? Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value:
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
The last 2 digits are for colour temperature.
The higher the colour temperature, the cooler the impression of light.
Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere.
Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light.
2700K extra warm white
3000K warm white
3500K neutral white
4000K cool white
5000-5500K daylight
6000K cool daylight
? Inner ring colour.
? Colour of the bracket that will be placed on the lighting track.
? Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
? Steel wire colour.
?

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.
? Articles classified by component type.
? Connection type of the output.
?

The way the power can be connected.
? The way the power can be tapped for looping through.
? For constant current drive LED's are connected in series. The driver must be able to provide the appropriate current.
? The way the suspension of the filament is made. Ordinary light bulbs have a standard suspension. Reinforced construction lights are equipped with additional mounting points for the glow wire, ​​making the light more resistant to vibration. These lamps can be applied on handlamps, trains, boats and other places with a lot of vibration, such as machinery and wooden floors. These lamps can also be used without problems at home.
? Number of hours after which 10% of the lamps have been interrupted when using a conventional (wound with copper wire, not electronic) ballast.
? Number of hours after which 20% of the lamps have been interrupted when using a conventional (wound with copper wire, not electronic) ballast.
? Number of hours after which 5% of the lamps have been interrupted when using a conventional (wound with copper wire, not electronic) ballast.
? Number of hours after which 50% of the lamps have been interrupted when using a conventional (wound with copper wire, not electronic) ballast.
? A front glass has the advantage that the inner reflector cannot contaminate it.
Some lamps have a matte or coloured glass front.
? Length of the cover in (milli)metres.
?

The surface area of ​​the core (mm2).
? Depth in millimetres.
? Diameter in millimetres, measured at the widest point.
? Steel wire colour.
?

Dim to warm is a dimming technique that adjusts colour temperature as the light is dimmed: it shifts from warm white to extra warm white when fully dimmed. This technique has various names, such as Dimtone or Glowdim.
? Dim type: AM, PWM or hybrid.
? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
? Not every dimmable ballast or light source can dim to 0% level, here is the dimming range.
? Earthing connection available.
? This is the code for car lamps to indicate that they comply with European legislation. Lamps with the same ECE code are interchangeable.
? Number of hours with 10% of the lamps has been interrupted by application of an electronic (or HF) ballast.
? Number of hours with 20% of the lamps has been interrupted by application of an electronic (or HF) ballast.
? Number of hours after which 5% of the lamps have been interrupted when using a conventional (wound with copper wire, not electronic) ballast.
? Number of hours with 50% of the lamps has been interrupted by application of an electronic (or HF) ballast.
? If a luminaire has an emergency function, the autonomy time is indicated here.
? The diameter of the flange measured at the widest point.
? The thickness of the flange measured at its thickest point.
? Focal length of the lamp.
? Glass colour.
? Many lamps are available in 2 versions: heat forwards or heat backwards. Please note the user manual of the fixture!
? Maximum height in millimetres.
? Height adjustable on the track bracket.
? LED fixture with an extra high light output
? The size of the hole you can build in the fixture.
? Ignition voltage of the ballast or lamp in kV.
?
This may be a fixed voltage or two values ​​with a hyphen.
You can use the product within these limits.
? Inside diameter for round items.
?

The IP (Ingress Protection) code indicates the degree of protection against ingress of moisture and solid objects. The code consists of two firures.
The first figure indicates the protection against objects and dust:
IP 0x - not protected
IP 1x - protected against objects with a diameter above 50 mm
IP 2x - protected from objects with a diameter greater than 12 mm (touch safe)
IP 3x - protected from objects with a diameter greater than 2.5 mm
IP 4x - protected against objects with a diameter greater than 1 mm
IP 5x - protected against dust ( dust )
IP 6x - dustproof

The second figure indicats the protection against water:
IP x0 - unprotected (plain)
IP x1 - Protected against dripping water (drip)
IP x2 - Protected against dripping water when tilted to 15 degrees
IP x3 - protected against spraying water (rain tight)
IP x4 - protected against splashing water (splash proof)
IP x5 - protected against water jets (splashproof)
IP x6 - protected from rainstorms
IP x7 - protected against accidental immersion (30 minutes to 1 meter deep) (waterproof)
IP x8 - protected from stay under water (pressure proof)
? For many applications, there are special lamps. Maybe your application there and there is a more suitable lamp available.
? Cap, lamp holder or lamp base type.
? The current of the lamp or ballast lamp in A (Ampère).
? Lamp holder version: either smooth, external thread or external thread with flange.
? Luminaire including or excluding lamp(s).
? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
? Length of cord between plug and switch in metres.
? Length of cord between switch and end of cord in metres.
? This is the code on the lamp or appliance that the lamps meet the standards LIF. LIF stands for Lighting Industry Federation. This institute developed standards for performance, safety and dimensions. Lamps with a similar LIF code are interchangeable.
? Type of lamp that fits in the luminaire. In some cases, several types of lamps can be used in one luminaire.
? The amount of light as a percentage that is transmitted through the material.
? Application of the luminaire depending on the environment. For example, an indoor fitting cannot be used outdoors. An outdoor luminaire, on the other hand, could be used indoors, but may be less suitable here, fore example because it provides too much light or is aesthetically unsuitable.
? Version can vary, , for example left or right variant, with frame or without frame ( trimless, frameless or no frame).
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
? The amount of light transmitted by LEDstrip per second per meter length. The unit of luminous flux is the lumen (lm).
? The light flux that is emitted in a certain direction. The unit of luminous intensity is the candela (cd).
? Material of which the major part of the product is made.
?

Material of which the cover of the product is made.

A Polycarbonate (PC) cover is mechanically much stronger (impact resistant) but less chemically resistant to a number of substances. For general purposes, this is a good choice.

Acrylic (PMMA)  is robust but more resistant to eg hydrochloric acid> 20%, formic acid, 10% nitric acid, ammonia (liquid), often used in piggeries and car washes.
? Maximum amount of power, expressed in watts, that can be connected to the transformer in order to work properly. If the assets exceed this maximum amount, the transformer may behave abnormally: known phenomena in electronic transformers are the lights switching on and off, and no output voltage.
? The minimum power must be connected to the transformer to work properly. If the assets are below the transformer behave abnormally. Known phenomena are electronic transformers are flashing lights, brighter and fainter burning lamps and no output voltage.

A conventional wound transformer must be at least 75% of the maximum power charge. If the load is below this limit, the output voltage too high making the lamps extremely much shorter life. The color of the lamps is usually very white.
?  The dimensions or art of the mounting hole or thread. Note M8x1, M10x1 and  M13x1 are fine metric and not eqal to the standard thread!
? Number of wires in the cable or cord.
? Number of LEDs per meter of LED strip.
? Number of modules of 18mm width, which is the standard size for DIN track components.
? Number of poles of the component. A switchable neutral is not protected.
? The life span of a lamp may be limited by the number of switch cycles, which is the number of times a lamp can be switched on and off before it becomes defective.
? A nylon coating provides steel wire with a protection that prevents damage when the wire touches delicate surfaces. It also allows a steel wire to be coloured white or black. Cable grippers do have less grip due to this coating, which makes the load 30% less than with uncoated steel wire.
? Each type of LED requires a different driver. Current-controlled LEDs of 350, 700, 1050 and 1400mA need to be connected in series. This can be easily done with an LED distributor. Unused outputs are shorted with a wire . First connect the wires, then you can put power on! Never disconnect wires under power!
? The output voltage is indicated here. Voltage-controlled LEDs must always be connected in parallel.
? Outside diameter for round items.
? Outside Dimension is the largest size, often of the lamp head.
? Premium White gives the best possible light quality for fashion shops and supermarkets.
? Equipped with plastic coating, which holds together the lamp components and glass in the event of breakage.
Suitable for the HCCP and ISO 22000 standard.
Applied to places where lamp rupture may cause damage to products or processes. The coating has a lower UV radiation.
? With quick mounting, the rail bracket can be mounted easily without tools.
? The highest value of the short-circuit current that the component can shut.
? The nominal current of the product in A (Ampère). 1A = 1000mA.
? The nominal valua of the fault current at earth leakage switches and earth leakage circuit breakers.
? The required recessed height behind the luminaire. More space is often needed due to heat development and tilting of the luminaire.
? Length of the reel in metres.
? The type of reflector which is in the armature located. For TL-D luminaires matt the most applied, dirt on the reflector is not or hardly seen. For T5 fixtures is a high gloss reflector optical much nicer, the luminaire is less seen. In the LTS fittings with SDW-T or SDW-TG lamps for the bakery in the past is often used a gold reflector for a warmer color. For expansion with existing fixtures would be an option. We prefer a silver reflector with possibly a bakery filter because much less distortion of the color displays compared to a gold reflector.
? Een borging zorgt ervoor dat de verstelbus pas versteld kan worden als de borging is losgedraaid. Na losdraaien kan de verstelnippel ingedrukt worden. Als de juiste hoogte is ingesteld, kan de borging weer worden vastgedraaid. Dit is een extra beveiliging.
? Product shape.
? Ballasts come in a cold and warm start. Cold start is slightly more energy efficient but has the disadvantage that it only up to 3x per day may change, otherwise it is defective.
Warm start is today the most widely used.
? De staaldraad kan bestaan uit een bundel van 1x19 staaldraden of uit 7x7 staaldraden bij elkaar. De uitvoering van 1x19 is minder flexibel en wordt hierdoor vaak toegepast bij remkabels. De uitvoering van 7x7 is veel flexibeler en verstelbussen hebben een betere grip op dit type staaldraad.
? Steel wire length in metres.
? Suitable for PL-Q 2 pin, CFL Square 2 pin, 2 pin 2D lamps. Only lamps with the specified wattage and number can be applied. Other combinations will not work.
? Suitable for PL-Q 4-pin CFL Square 4 pin, 4 pin 2D lamps.
You can only use lamps with the specified wattage and number. Other combinations will not work.
? Suitable for Baro BFL Mini lamps.
You can only use lamps with the specified wattage and number. Other combinations will not work.
? Suitable for Baro BFL Top lamps.
You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
?

Note Philips has an ignition voltage of 1.5 kV, General Electric and Sylvania 4kV, therefore these are not interchangeable. You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
?

Note General Electric and Sylvania have an ignition of 4kV, Philips 1.5 kV, therefore these are not interchangeable.       You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
?

You can only use lamps with the specified wattage and number. Other combinations will not work.

?

You can only use lamps with the specified wattage and number. Other combinations will not work.

? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? The number of lights that the luminaire can contain. Most luminaires are supplied without lamps. If lamps are included can be found in filter property Lamp included.
?

Suitable for PL-C 2 Pin, Dulux D, Biax D Lynx CF-D lamps.                                                                                       You can only use lamps with the specified wattage and number. Other combinations will not work.

? Suitable for PL-C 4 Pin, Dulux D / E, Biax D / E, Lynx CF-DE lamps.                                                                          You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
?

Suitable for PL-L 4, L Dulux, Biax L, Lynx CF-L lamps.                                                                                               You can only use lamps with the specified wattage and number. Other combinations will not work.

?

Suitable for PL-R 4-pin Dulux T / E HE High Efficiency GR14q-1 lamps.                                                    You can only use lamps with the specified wattage and number. Other combinations will not work.

? Suitable for PL-S 2 Pin, Dulux , Biax , Lynx CF- lamps.                                                                                              You can only use lamps with the specified wattage and number. Other combinations will not work.
? Suitable for PL- 4-pin Dulux / E, Biax / E, Lynx CF-SE lamps.                                                                                    You can only use lamps with the specified wattage and number. Other combinations will not work.
? Suitable for PL-T 2 Pin, Dulux T, T Biax, Lynx CF-T lamps.                                                                                        You can only use lamps with the specified wattage and number. Other combinations will not work.
? Suitable for PL-T 4 Pin, Dulux T / E, Biax T / E, CF Lynx-TE lamps.                                                                               You can only use lamps with the specified wattage and number. Other combinations will not work.
? Suitable for SDW-T lamps.
You can only use lamps with the specified wattage and number. Other combinations will not work.
?

Suitable for SDW-TG lamps.
You can only use lamps with the specified wattage and number. Other combinations will not work.

? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? You can only use lamps with the specified wattage and number. Other combinations will not work.
? Suitable for TL-D, L Lumilux, T8 Polylux, Luxline T8 fluorescent tubes.                                                                        You can only use lamps with the specified wattage and number. Other combinations will not work. 
?

Suitable for old "thick" T12 TL fluorescent tubes of 38mm.                                                                                        You can only use lamps with the specified wattage and number. Other combinations will not work. 
?

Suitable for TL5 and TL5 HE HO, T5 FH and FQ T5, T5 and T5 FHE FHO, High Efficency T5 and T5 High Output lamps.     You can only use lamps with the specified wattage and number. Other combinations will not work. 

At the specified output has gone out of the standard length of the lamps.

14W and 24W 549mm

21W and 39W 849mm

28W and 54W 1149mm

35W, 49W and 80W 1449mm

Special sizes for aquariums will not work.
? Suitable for TL5 Circular, T5 FC lamps.                                                                                                                   You can only use lamps with the specified wattage and number. Other combinations will not work. 
? Suitable for round 26mm T8 TL-D fluorescent tubes. You can only use lamps with the specified wattage and number. Other combinations will not work. 
?

This part is suitable for a wire which is within these diameter
? Length of the supplied pendant or steel wires.
? The brand of the bracket that will be placed on the lighting track. We make assemblies in different versions with different brands of rail brackets.
? Specification of thread. Note M8x1, M10x1 and  M13x1 are fine metric and not eqal to the standard thread!
? Thread length in millimetres.
? Specification of the tread of a lampholder or screw ring.
? The thread can be either internal (inside thread) or external (oudside thread).
? Number of cores and conductor cross-section of the internal wiring for quick and easy interconnection of fixtures with a cable.
? The number of degrees that the fixture can be tilted vertically.
? As LED strips and rope lights have several LEDs or lamps connected in series, they cannot be shortened to any length. The number of mm by which the product can be shortened is specified here.
? The characteristic of fuses can be fast (F) or slow (T).
? Type of luminaire application.
? Many lamps have a UV filter against discolouration. This filter is often recognisable as a bluish glow over the lamp. If a lamp has a UV filter, this is indicated on its packaging and, in most cases, also on the lamp itself.
? This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
? The power that the bulb consumes. This does not include the loss of any ballast or transformer.
? Replacement bulb power specified by the manufacturer. A CFL and LED display average 5x as much light compared to a standard bulb. To the CFL or LED power available divide the bulb power by 5.
? Maximum width in millimetres.
? Wire spacing between the wires. Most fixtures have a fixed size, some are adjustable.
Length
>
>
? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Luminous flux
>
>
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).


14035 products   511 512 513 514 515 516 517


VMvS H03VV-F 2x0,75mm2 rond zilver per rol 100m
29430007 :: show details
VMvS H03VV-F 2x0,75mm2 rond zilver per rol 100m past door draadbuis M10x1

 
No longer available
Philips Master TL5 High Efficiency Eco 13W kleur 830 549mm 13W=14W
10000611 :: show details
Philips Master TL5 High Efficiency Eco 13W kleur 830 549mm 13W=14W

 
No longer available
Philips Master TL5 High Efficiency Eco 13W kleur 840 549mm 13W=14W
10000612 :: show details
Philips Master TL5 High Efficiency Eco 13W kleur 840 549mm 13W=14W

 
No longer available
Conex lasklem 1,0-2,5mm2 transparant mini voor massieve draad 5 voudig /50
79000039 :: show details
Conex lasklem 1,0-2,5mm2 transparant mini voor massieve draad 5 voudig /50

 
No longer available
Ivela 12V railadaptor M10 schroefdraad uitwendig wit
23100116 :: show details
Ivela 12V railadaptor M10 schroefdraad uitwendig wit

 
No longer available
Ivela 12V railadaptor M8x1 schroefdraad inwendig wit
23100115 :: show details
Ivela 12V railadaptor M8x1 schroefdraad inwendig wit

 
No longer available
Ivela 12V railadaptor M8x1 schroefdraad inwendig zwart
23100051 :: show details
Ivela 12V railadaptor M8x1 schroefdraad inwendig zwart

 
No longer available
Philips SOX Plus 55W BY22d 425mm
12200024 :: show details
Philips SOX Plus 55W BY22d 425mm


replaced by: article 12200021
 
No longer available
Arditi snoerdimmer 034164 10-75W 230V voor gloeilampen, halogeenlampen 230V en spaarlampen tot 23W met drukknopbediening en LED indicator transparant
29100679 :: show details
Arditi snoerdimmer 034164 10-75W 230V voor gloeilampen, halogeenlampen 230V en spaarlampen tot 23W met drukknopbediening en LED indicator transparant

 
No longer available
Calex kaarslamp 25W E14 230V bentip transparant geel
13501386 :: show details
Calex kaarslamp 25W E14 230V bentip transparant geel

 
No longer available
General Electric SOX-E 66W BY22d 528mm 30209
12200092 :: show details
General Electric SOX-E 66W BY22d 528mm 30209


replaced by: article 12200067
 
No longer available
Ivela 12V bevestigingsset wit
23100130 :: show details
Ivela 12V bevestigingsset wit

 
No longer available
Ivela 12V staaldraadset 2m wit
23100058 :: show details
Ivela 12V staaldraadset 2m wit

 
No longer available
Osram Halolux T 64861 TH buislamp 40W E14 230V helder
11101690 :: show details
Osram Halolux T 64861 TH buislamp 40W E14 230V helder

 
No longer available
Philips Master TL5 HE 21W 827 849mm
10001310 :: show details
Philips Master TL5 HE 21W 827 849mm


replaced by: article 10003382
 
No longer available
TCI 123004/158 EM5 T5/8ME 1-58 noodunit met 4,8V 4,0Ah accu en LED
22900003 :: show details
TCI 123004/158 EM5 T5/8ME 1-58 noodunit met 4,8V 4,0Ah accu en LED Dit is de noodunit met omschakelunit, zonder het vsa voor continue branden. Alleen voor 1 lamps vsa geschikt. Let op bij conventioneel vsa moet de starter los bedraad worden naar de omschakelunit. Werkt niet met lampvoet en geïntregeerde starterhouder.

 
No longer available
Ion Industries ITD-200 inbouwdimmer voor pulsdrukker 1-200W voor dimbare LED's, gloeilampen, 230V halogeenlampen en 12V halogeenlampen met elektronische trafo
72900421 :: show details
Ion Industries ITD-200 inbouwdimmer voor pulsdrukker 1-200W voor dimbare LED's, gloeilampen, 230V halogeenlampen en 12V halogeenlampen met elektronische trafo

 
No longer available
Ion Industries snoerdimmer 1-50W voor dimbare LED's, gloeilampen, 230V halogeenlampen en 12V halogeenlampen met elektronische trafo RVS zwart met drukknoppen in te stellen op minimaal- en maximaal lichtnivo
72900162 :: show details
Ion Industries snoerdimmer 1-50W voor dimbare LED's, gloeilampen, 230V halogeenlampen en 12V halogeenlampen met elektronische trafo RVS zwart met drukknoppen in te stellen op minimaal- en maximaal lichtnivo

 
No longer available
Philips Master TL5 HE 21W 830 849mm
10001320 :: show details
Philips Master TL5 HE 21W 830 849mm

 
No longer available
Arditi 401177 LED driver 350mA 6W
29900733 :: show details
Arditi 401177 LED driver 350mA 6W

 
No longer available
Prices ex. shipping & handling
You've viewed 10280 of 14035 items

14035 products   511 512 513 514 515 516 517

© 2025 First Light B.V.
0
Home
Customer service About First Light Placing orders and payment Shipping and handling costs Pick-up orders VAT free deliveries on international orders Returns Opening hours Useful tips Waste disposal fee Privacy and Safety Disclaimer Terms and conditions Contact Directions FAQ
Account Login Forgot password Customer registration
Technical info Halogen lamps Colour codes IP rating
Sitemap




First Light B.V.

De Beverspijken 5a
5221 EE 's-Hertogenbosch
Nederland


T: +31(0)73 6235085
E: verkoop@firstlight.nl

W: www.firstlight.nl


KvK: 17130112
BTW: NL809348135B01