LTS SCE 401.73 SDW-TG 50-100W 60° excl. VSA zilvergrijs

Artikelnummer fabrikant	621211	? Manufacturer's part number.
Ballast	Exclusive	? A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Beam angle	60°	? The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area. For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
Brand	LTS	? If the product is unbranded, we do not have a regular supplier for it. Therefore, the product version may slightly vary.
Colour	Silver grey	? Most common colour in the product.
Hole size	Ø165mm	? The size of the hole you can build in the fixture.
Lamp base	GX12-1	? Cap, lamp holder or lamp base type.
Lamp included	No	? Luminaire including or excluding lamp(s).
Light source	SDW-TG	? Type of lamp that fits in the luminaire. In some cases, several types of lamps can be used in one luminaire.
Luminaire application	Indoor	? Application of the luminaire depending on the environment. For example, an indoor fitting cannot be used outdoors. An outdoor luminaire, on the other hand, could be used indoors, but may be less suitable here, fore example because it provides too much light or is aesthetically unsuitable.
Outside measurements	Ø179mm	? Outside Dimension is the largest size, often of the lamp head.
Pieces per outer carton	1	? Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Recessed depth	135mm	? The required recessed height behind the luminaire. More space is often needed due to heat development and tilting of the luminaire.
Reflector version	Silver	? The type of reflector which is in the armature located. For TL-D luminaires matt the most applied, dirt on the reflector is not or hardly seen. For T5 fixtures is a high gloss reflector optical much nicer, the luminaire is less seen. In the LTS fittings with SDW-T or SDW-TG lamps for the bakery in the past is often used a gold reflector for a warmer color. For expansion with existing fixtures would be an option. We prefer a silver reflector with possibly a bakery filter because much less distortion of the color displays compared to a gold reflector.
Suitable for number of lamps	1	? The number of lights that the luminaire can contain. Most luminaires are supplied without lamps. If lamps are included can be found in filter property Lamp included.
Type of luminaire	Ceiling recessed	? Type of luminaire application.
EAN code	4043544167651	? EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra)		? EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.

LTS SCE 401.73 SDW-TG 50-100W 60° excl. VSA zilvergrijs
cardanisch inbouwarmatuur gasontlading met zilverkleurige reflector en veren voor plafonddikte 10-30mm
vsa, lamp en filter los meebestellen zie details