Nederlands Deutsch Francais English
0
   Cart

SLV 1008682 10x LED Tube V T8 EM/M 1200 865

Article ID:
14000595



New stock expected on:  
23-05-2026 After placing the order




Properties
Manufacturer's article number 1008682 Manufacturer's part number.
Application directly to the mains Yes These lamps can be applied directly to mains voltage 230V AC (alternating current)
Application to conventional ballast EM Yes These lamps can be applied on a conventional ballast (wounded coil, choke or magnetic ballast).
Application to electronic ballast EB No These lamps can be applied with an electronic ballast (EVSA or HF ballast). Consult the manufacturer's compatibility lists to check whether the combination is compatible.
Application to LED driver No These lamps can be applied to an LED driver. Please note the manufacturer's specifications for the correct current value.
Beam angle 180° The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area.
For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
Big White 2025 page no. 1031

Page number in SLV Big White catalogue 2025.

Brand SLV If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Built-in motion detector No

Luminaire or lamp has a built-in motion detector. The light will switch on when a movement is detected.

Colour code 865 Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value:
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
The last 2 digits are for colour temperature.
The higher the colour temperature, the cooler the impression of light.
Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere.
Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light.
2700K extra warm white
3000K warm white
3500K neutral white
4000K cool white
5000-5500K daylight
6000K cool daylight
Colour rendering index Ra 80 Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
Colour temperature 6500K

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

Diameter 28mm Diameter in millimetres, measured at the widest point.
Dim to warm No

Dim to warm is a dimming technique that adjusts colour temperature as the light is dimmed: it shifts from warm white to extra warm white when fully dimmed. This technique has various names, such as Dimtone or Glowdim.

Dimmable No Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Lamp base G13 Cap, lamp holder or lamp base type.
Length 1200mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Luminous flux 2000lm The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
Outside dimensions Ø28mm Outside Dimension is the largest size, often of the lamp head.
Pieces per outer carton 1 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Wattage 16W The power that the bulb consumes. This does not include the loss of any ballast or transformer.
EAN code 4024163300254 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
SLV 1008682 10x LED Tube V T8 EM/M 1200 865
Downloads Your corrections
Remarks
Full name
Phone
Email address