Nederlands Deutsch Francais English
0
   Cart

Ledvance LED Tube Performance Class T8 External 15W 830 3000K 1200mm 350mA Splinterbescherming dankzij speciale PET-coating Let op mag alleen met externe driver toegepast worden zie accessoires

Article ID:
14071606



New stock expected on:  
13-05-2026 After placing the order




Properties
Manufacturer's article number 4099854015281 Manufacturer's part number.
Application directly to the mains No These lamps can be applied directly to mains voltage 230V AC (alternating current)
Application to conventional ballast EM No These lamps can be applied on a conventional ballast (wounded coil, choke or magnetic ballast).
Application to electronic ballast EB No These lamps can be applied with an electronic ballast (EVSA or HF ballast). Consult the manufacturer's compatibility lists to check whether the combination is compatible.
Application to LED driver Yes These lamps can be applied to an LED driver. Please note the manufacturer's specifications for the correct current value.
Average life span 50000h The life span of a party of lamps of which 50% of the lamps will continue to function. Sometimes, incandescent or halogen lamps may become defective more quickly, but in case 50% of the lamps do still reach the lifespan, the lamps are still OK.
Ballast Exclusive A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Beam angle 190° The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area.
For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
Brand Ledvance If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Built-in motion detector No

Luminaire or lamp has a built-in motion detector. The light will switch on when a movement is detected.

Colour code 830 Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value:
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
The last 2 digits are for colour temperature.
The higher the colour temperature, the cooler the impression of light.
Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere.
Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light.
2700K extra warm white
3000K warm white
3500K neutral white
4000K cool white
5000-5500K daylight
6000K cool daylight
Colour rendering index Ra 80 Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
Colour temperature 3000K

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

Constant current 350mA For constant current drive LED's are connected in series. The driver must be able to provide the appropriate current.
Diameter 27mm Diameter in millimetres, measured at the widest point.
Dim to warm No

Dim to warm is a dimming technique that adjusts colour temperature as the light is dimmed: it shifts from warm white to extra warm white when fully dimmed. This technique has various names, such as Dimtone or Glowdim.

Dimmable Yes Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Eprel registration number 1278963 Eprel (European Product Registry for Energy Labelling) registration number.
Lamp base G13 Cap, lamp holder or lamp base type.
Length 1200mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Luminous flux 2160lm The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
Number of switch cycles 200000 The life span of a lamp may be limited by the number of switch cycles, which is the number of times a lamp can be switched on and off before it becomes defective.
Pieces per outer carton 25 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Power factor 0,9 Power factor is the ratio between net power and apparent power. The PF is the value that indicates how efficiently electrical power is delivered to the consumer. Ideally, the PF is equal to 1. Anything below 1 means that additional power is required to deliver the desired power to the consumer.
Protective sleeve Yes Equipped with plastic coating, which holds together the lamp components and glass in the event of breakage.
Suitable for the HCCP and ISO 22000 standard.
Applied to places where lamp rupture may cause damage to products or processes. The coating has a lower UV radiation.
Temperature range -20° to 50° C If applied outside the specified temperature range, the components will not function properly.
Wattage 15W The power that the bulb consumes. This does not include the loss of any ballast or transformer.
EAN code 4099854015281 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) 4099854015298 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
Ledvance LED Tube Performance Class T8 External 15W 830 3000K 1200mm 350mA
Splinterbescherming dankzij speciale PET-coating
Let op mag alleen met externe driver toegepast worden zie accessoires
Accessories
Ledvance DR EXT DALI-P-1x7-37 220-240 LED driver Dali 2 dimbaar inbouwmodel speciaal voor Ledvance LEDbuizen 1x7-37W voor externe driver

 
Ledvance DR EXT DALI-P-2x7-26 220-240 LED driver Dali 2 dimbaar inbouwmodel speciaal voor Ledvance LEDbuizen 2x7-26W voor externe driver

 
Downloads Your corrections
Remarks
Full name
Phone
Email address