Nederlands Deutsch Francais English
0
   Cart

Philips HF-Ri TD 1 26-42/ PL-T/C E+ evsa touch & DALI Regulator Intelligent DALI en Touch & Dim kunnen niet samen worden gebruikt

Article ID:
29100625



Only 1 items currently in stock
Last stock




Properties
Manufacturer's article number 24167600 Manufacturer's part number.
Ballast Electronic A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Ballast version Built-in ballast without strain relief

Version of the ballast.

Brand Philips If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Dimmable Dali, Pushbutton Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Dimming range 1-100% Not every dimmable ballast or light source can dim to 0% level, here is the dimming range.
Height 33mm Maximum height in millimetres.
Length 123mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Material Plastic Material of which the major part of the product is made.
Material number (12NC) 913700684766 Material number from Philips
Pieces per outer carton 12 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Shape Rectangular Product shape.
Start type Warm start >5x switch a day Ballasts come in a cold and warm start. Cold start is slightly more energy efficient but has the disadvantage that it only up to 3x per day may change, otherwise it is defective.
Warm start is today the most widely used.
Suitable for PL-C 4p 1x26W Suitable for PL-C 4 Pin, Dulux D / E, Biax D / E, Lynx CF-DE lamps.                                                                          You can only use lamps with the specified wattage and number. Other combinations will not work.
Suitable for PL-T 4p 1x26W, 1x32W, 1x42W Suitable for PL-T 4 Pin, Dulux T / E, Biax T / E, CF Lynx-TE lamps.                                                                               You can only use lamps with the specified wattage and number. Other combinations will not work.
Voltage 220V-240V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Width 79mm Maximum width in millimetres.
EAN code 8718291241676 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
Philips HF-Ri TD 1 26-42/ PL-T/C E+ evsa touch & DALI Regulator Intelligent
DALI en Touch & Dim kunnen niet samen worden gebruikt
Downloads Your corrections
Remarks
Full name
Phone
Email address