Nederlands Deutsch Francais English
0
   Cart

LED reflector lamps MR11 35mm



Prices are exclusive waste disposal fee.
Prices are exclusive of VAT.
LED reflector lamps MR11 35mm
Filters
Filter by:
Either show items that are in stock or items that are not in stock.
? The life span of a party of lamps of which 50% of the lamps will continue to function. Sometimes, incandescent or halogen lamps may become defective more quickly, but in case 50% of the lamps do still reach the lifespan, the lamps are still OK.
? The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area.
For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
? If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
? Most common colour in the product.
? Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value:
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
The last 2 digits are for colour temperature.
The higher the colour temperature, the cooler the impression of light.
Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere.
Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light.
2700K extra warm white
3000K warm white
3500K neutral white
4000K cool white
5000-5500K daylight
6000K cool daylight
? Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
?

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
? Glass colour.
? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
? The light flux that is emitted in a certain direction. The unit of luminous intensity is the candela (cd).
? The life span of a lamp may be limited by the number of switch cycles, which is the number of times a lamp can be switched on and off before it becomes defective.
? This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
? The power that the bulb consumes. This does not include the loss of any ballast or transformer.
? Replacement bulb power specified by the manufacturer. A CFL and LED display average 5x as much light compared to a standard bulb. To the CFL or LED power available divide the bulb power by 5.
Luminous flux
>
>
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).

Diameter: 35mm
Dim to warm: No
IP protection degree: IP20
Lamp base: GU4

12 products     1  


SPL MR11 LEDspot 2,5W GU4 12-25V DC 3000K kleur 830 35° niet dimbaar

 

8 items in stock
SPL MR11 LEDspot 4,2W GU4 12V 2700K kleur 827 36° niet dimbaar

 

Expected 28-06-2026
Philips CorePro LEDlamp MR11 2,3W-20W GU4 12V 2700K kleur 827 36° niet dimbaar

 

15 items in stock
Philips Master Value LEDlamp MR11 3,5W=20W GU4 12V 2700K kleur 827 24° niet dimbaar

 

29 items in stock
Ledvance Performance Class LEDlamp MR11 2,5W=20W GU4 12V 840 4000K 36° niet dimbaar

 

Only 30 items in stock

Last stock
Ledvance Performance Class LEDlamp MR11 4,2W=35W GU4 12V 827 2700K 36° niet dimbaar

 

Expected 29-06-2026
Ledvance Performance Class LEDlamp MR11 4,5W=35W GU4 12V 927 2700K 36° dimbaar

 

21 items in stock
Osram Parathom LEDlamp MR11 2,8W=20W GU4 12V 2700K kleur 927 36° dimbaar

 

56 items in stock
Osram Parathom LEDlamp MR11 4,2W=35W GU4 12V 2700K kleur 827 36° niet dimbaar


replaced by: Article 14071562
 

Only 7 items in stock

Last stock
Osram Parathom LEDlamp MR11 4,5W=35W GU4 12V 2700K kleur 927 36° dimbaar


replaced by: Article 14071526
 

Only 1 items in stock

Last stock
SPL MR11 LEDspot 4,2W GU4 12V 827 2700K 36° dimbaar

 

Expected 28-06-2026
SPL MR11 LEDspot 4,4W GU4 12V 2700K kleur 827 36° dimbaar


replaced by: Article 14101218
 

Only 2 items in stock

Last stock
You have viewed 12 of 12 items

12 products     1