Nederlands Deutsch Francais English
0
   Cart

SL halogeenlamp MR16 50mm 20W 12V GU5.3 38°

Article ID:
11001014



26 items currently in stock
New stock expected on:  
05-05-2026 After placing the order




Properties
Manufacturer's article number 642731338 Manufacturer's part number.
ANSI code BAB The ANSI code on a lamp or device indicates that the product meets ANSI (American National Standards Institute) standards. ANSI is an organisation that develops standards for performance, dimensions and safety. Lamps with corresponding ANSI codes are interchangeable.
Beam angle 38° The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area.
For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
Brand SL If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Colour rendering index Ra 100 Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
Colour temperature 3000K

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

Cover glass Clear A front glass has the advantage that the inner reflector cannot contaminate it.
Some lamps have a matte or coloured glass front.
Diameter 50mm Diameter in millimetres, measured at the widest point.
Dimmable Yes Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Heat output Large part backwards Many lamps are available in 2 versions: heat forwards or heat backwards. Please note the user manual of the fixture!
Lamp application General For many applications, there are special lamps. Maybe your application there and there is a more suitable lamp available.
Lamp base GU5.3 Cap, lamp holder or lamp base type.
Luminous flux 150lm The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
Pieces per outer carton 200 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Voltage 12V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Wattage 20W The power that the bulb consumes. This does not include the loss of any ballast or transformer.
EAN code 8718309824105 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) 28718309824109
18718309824102
EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
SL halogeenlamp MR16 50mm 20W 12V GU5.3 38°
Downloads Your corrections
Remarks
Full name
Phone
Email address