Nederlands Deutsch Francais English
0
   Cart

ELT 1113060 AC1 4/23-B2-SC conventioneel vsa

Article ID:
29100818

Discontinued


Properties
Manufacturer's article number 1113060 Manufacturer's part number.
Ballast Conventional A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Ballast version Coil

Version of the ballast.

Brand ELT If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Dimmable No Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Height 28,5mm Maximum height in millimetres.
Length 150mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Pieces per outer carton 30 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Shape Oblong Product shape.
Suitable for 2D 4p 1x38W Suitable for PL-Q 4-pin CFL Square 4 pin, 4 pin 2D lamps.
You can only use lamps with the specified wattage and number. Other combinations will not work.
Suitable for PL-L 4p 1x36W, 2x18W

Suitable for PL-L 4, L Dulux, Biax L, Lynx CF-L lamps.                                                                                               You can only use lamps with the specified wattage and number. Other combinations will not work.

Suitable for TL 26mm 1x36W, 2x18W Suitable for TL-D, L Lumilux, T8 Polylux, Luxline T8 fluorescent tubes.                                                                        You can only use lamps with the specified wattage and number. Other combinations will not work. 
Suitable for TL 38mm 1x40W, 2x20W

Suitable for old "thick" T12 TL fluorescent tubes of 38mm.                                                                                        You can only use lamps with the specified wattage and number. Other combinations will not work. 

Voltage 230V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Width 41mm Maximum width in millimetres.
EAN code 8435110404363 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
ELT 1113060 AC1 4/23-B2-SC conventioneel vsa
Downloads Your corrections
Remarks
Full name
Phone
Email address