Nederlands Deutsch Francais English
0
   Cart

Philips EXC 91 SOX-E evsa voor SOX-E 91W

Article ID:
29102341

Discontinued


Properties
Manufacturer's article number 74108030 Manufacturer's part number.
Ballast Electronic A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Ballast version Built-in ballast without strain relief

Version of the ballast.

Brand Philips If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Dimmable No Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Height 28mm Maximum height in millimetres.
Length 335mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Material number (12NC) 913700621866 Material number from Philips
Pieces per outer carton 10 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Suitable for SOX-E 1x91W You can only use lamps with the specified wattage and number. Other combinations will not work.
Voltage 230V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Width 39mm Maximum width in millimetres.
EAN code 8711500741080 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) 08711500741097 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
Philips EXC 91 SOX-E evsa voor SOX-E 91W
Downloads Your corrections
Remarks
Full name
Phone
Email address