Nederlands Deutsch Francais English
0
   Cart

Philips HID-PV Xt 100 CDO C1 208-277V evsa

Article ID:
29102805

Discontinued


Properties
Manufacturer's article number 20521000 Manufacturer's part number.
Ballast Electronic A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Ballast version Built-in ballast without strain relief

Version of the ballast.

Brand Philips If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Dimmable No Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Height 65mm Maximum height in millimetres.
Length 150mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Pieces per outer carton 12 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Suitable for CDM/CDO-ET/TT 1x100W You can only use lamps with the specified wattage and number. Other combinations will not work.
Voltage 208V-277V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Width 65mm Maximum width in millimetres.
EAN code 8718291205210 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
Philips HID-PV Xt 100 CDO C1 208-277V evsa
Downloads Your corrections
Remarks
Full name
Phone
Email address