Nederlands Deutsch Francais English
0
   Cart

Philips MasterColour CDM-R 35W 942 PAR20 30D E27 Elite

Article ID:
12000513

Discontinued


Properties
Manufacturer's article number 65151200 Manufacturer's part number.
Beam angle 30° The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area.
For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
Brand Philips If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Colour code 942 Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value:
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
The last 2 digits are for colour temperature.
The higher the colour temperature, the cooler the impression of light.
Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere.
Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light.
2700K extra warm white
3000K warm white
3500K neutral white
4000K cool white
5000-5500K daylight
6000K cool daylight
Colour rendering index Ra 91 Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
Colour temperature 4200K

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

Diameter 63mm Diameter in millimetres, measured at the widest point.
Dimmable No Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Electronic 10% failure after 10000h Number of hours with 10% of the lamps has been interrupted by application of an electronic (or HF) ballast.
Electronic 20% failure after 12000h Number of hours with 20% of the lamps has been interrupted by application of an electronic (or HF) ballast.
Electronic 5% failure after 9000h Number of hours after which 5% of the lamps have been interrupted when using a conventional (wound with copper wire, not electronic) ballast.
Electronic 50% failure after 15000h Number of hours with 50% of the lamps has been interrupted by application of an electronic (or HF) ballast.
Lamp base E27 Cap, lamp holder or lamp base type.
Length 92mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Luminous intensity 5900cd The light flux that is emitted in a certain direction. The unit of luminous intensity is the candela (cd).
Material number (12NC) 928050700630 Material number from Philips
Pieces per outer carton 12 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Wattage 35W The power that the bulb consumes. This does not include the loss of any ballast or transformer.
EAN code 8718291651512 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) 08718291651529 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
Philips MasterColour CDM-R 35W lamp colour 942 PAR20 30D E27 Elite
Ceramic metal halide discharge lamp, with a long period of life and very high efficiency. The lamp produces sparkling, clear light with a high colour rendering index (CRI).
Downloads Your corrections
Remarks
Full name
Phone
Email address