Nederlands Deutsch Francais English
0
   Cart

PIL Lumis ELA AM HF 4x18W mat met 3 polig chassisdeel male en femalevoor platte stekkers en gemonteerde lichtbronnen 18W 840

Article ID:
20001743

Discontinued


Properties
Manufacturer's article number 19-00366 Manufacturer's part number.
Ballast Electronic A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Brand PIL If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Colour code 840 Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value:
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
The last 2 digits are for colour temperature.
The higher the colour temperature, the cooler the impression of light.
Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere.
Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light.
2700K extra warm white
3000K warm white
3500K neutral white
4000K cool white
5000-5500K daylight
6000K cool daylight
Colour temperature 4000K

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

Connection power output Flat 3 pole connector male The way the power can be tapped for looping through.
Dimmable No Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Height 95mm Maximum height in millimetres.
Hole size 585x585mm The size of the hole you can build in the fixture.
Lamp base G13 Cap, lamp holder or lamp base type.
Lamp included Yes Luminaire including or excluding lamp(s).
Length 597mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Light source T8 Type of lamp that fits in the luminaire. In some cases, several types of lamps can be used in one luminaire.
Luminaire application Indoor Application of the luminaire depending on the environment. For example, an indoor fitting cannot be used outdoors. An outdoor luminaire, on the other hand, could be used indoors, but may be less suitable here, fore example because it provides too much light or is aesthetically unsuitable.
Luminaire type Ceiling recessed Type of luminaire application.
Outside dimensions 597x597mm Outside Dimension is the largest size, often of the lamp head.
Pieces per outer carton 1 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Reflector version Matte The type of reflector which is in the armature located. For TL-D luminaires matt the most applied, dirt on the reflector is not or hardly seen. For T5 fixtures is a high gloss reflector optical much nicer, the luminaire is less seen. In the LTS fittings with SDW-T or SDW-TG lamps for the bakery in the past is often used a gold reflector for a warmer color. For expansion with existing fixtures would be an option. We prefer a silver reflector with possibly a bakery filter because much less distortion of the color displays compared to a gold reflector.
Suitable for number of lamps 4 The number of lights that the luminaire can contain. Most luminaires are supplied without lamps. If lamps are included can be found in filter property Lamp included.
Voltage 230V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Width 597mm Maximum width in millimetres.
EAN code 5414833029544 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
PIL Lumis ELA AM HF 4x18W mat met 3 polig chassisdeel male en femalevoor platte stekkers en gemonteerde lichtbronnen 18W 840
Downloads Your corrections
Remarks
Full name
Phone
Email address