Nederlands Deutsch Francais English
0
   Cart

SLV LED voeding 12V DC 60W 470508 310568

Article ID:
29105038

Discontinued


Properties
Manufacturer's article number 470508 Manufacturer's part number.
Appliance class Class I (earthed)

In the electrical appliance manufacturing industry, the following IEC protection classes are used to differentiate between the protective-earth connection requirements of devices.

Class I

These appliances must have their chassis connected to electrical earth (ground). This earth conductor is coloured green/yellow in most countries (green in US, Canada and Japan)

           

Class II

These appliances are double insulated. It has been designed is such a way that is does not require a safety connection to electrical earth (ground)

                                     

Class III

These appliances are designed to be supplied from a separated/safety extra-low voltage (SELV) power source maximum 50V (Volt) AC alternating current. The voltage from a SELV supply is low enough that under normal conditions a person can safely come into contact with it without risk of electrical shock.

              

 

Ballast LED Converter A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Ballast version Surface-mounted with strain relief

Version of the ballast.

Brand SLV If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Height 35mm Maximum height in millimetres.
Input voltage 230V
This may be a fixed voltage or two values ​​with a hyphen.
You can use the product within these limits.
Length 182mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Maximum wattage 60W Maximum amount of power, expressed in watts, that can be connected to the transformer in order to work properly. If the assets exceed this maximum amount, the transformer may behave abnormally: known phenomena in electronic transformers are the lights switching on and off, and no output voltage.
Old article number 310568 Old part number of the manufacturere. By renumbering, each SLV article has a new Europian part number.
Output voltage 12V DC (direct current) The output voltage is indicated here. Voltage-controlled LEDs must always be connected in parallel.
Pieces per outer carton 1 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Width 88mm Maximum width in millimetres.
EAN code 4024163105682 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
SLV LED voeding 12V DC 60W 470508 310568
Downloads Your corrections
Remarks
Full name
Phone
Email address