UV-A lamps

Old colour number 05.
UV-A colour 10.

Prices are exclusive waste disposal fee.

Prices are exclusive of VAT.

Filters

Filter on:

? Either show items that are in stock or items that are not in stock.

? The life span of a party of lamps of which 50% of the lamps will continue to function. Sometimes, incandescent or halogen lamps may become defective more quickly, but in case 50% of the lamps do still reach the lifespan, the lamps are still OK.

? If the product is unbranded, we do not have a regular supplier for it. Therefore, the product version may slightly vary.

? Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.

? Number of hours after which 50% of the lamps have been interrupted when using a conventional (wound with copper wire, not electronic) ballast.

? Diameter in millimetres, measured at the widest point.

? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.

? Number of hours with 10% of the lamps has been interrupted by application of an electronic (or HF) ballast.

? Inside diameter for round items.

? For many applications, there are special lamps. Maybe your application there and there is a more suitable lamp available.

? Cap, lamp holder or lamp base type.

? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.

? Outside diameter for round items.

? Equipped with plastic coating, which holds together the lamp components and glass in the event of breakage.
Suitable for the HCCP and ISO 22000 standard.
Applied to places where lamp rupture may cause damage to products or processes. The coating has a lower UV radiation.