Nederlands Deutsch Francais English
0
   Cart

SLV 1008727 Ordi II Pole 70 Sensor LED bolderarmatuur sensor 9,5W 822+830 2200K+3000K zwart dimbaar

Article ID:
24603492



New stock expected on:  
24-04-2026 After placing the order




Properties
Manufacturer's article number 1008727 Manufacturer's part number.
Big White 2025 page no. 0795

Page number in SLV Big White catalogue 2025.

Big White 2026 page no. 0793

Page number in SLV Big White catalogue 2026.

Brand SLV If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Built-in motion detector Yes

Luminaire or lamp has a built-in motion detector. The light will switch on when a movement is detected.

Colour Black Most common colour in the product.
Colour code 822+830 Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value:
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
The last 2 digits are for colour temperature.
The higher the colour temperature, the cooler the impression of light.
Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere.
Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light.
2700K extra warm white
3000K warm white
3500K neutral white
4000K cool white
5000-5500K daylight
6000K cool daylight
Colour rendering index Ra 80 Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
Colour temperature 2200K+3000K

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

Dim to warm No

Dim to warm is a dimming technique that adjusts colour temperature as the light is dimmed: it shifts from warm white to extra warm white when fully dimmed. This technique has various names, such as Dimtone or Glowdim.

Dimmable Yes Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Lamp included Yes Luminaire including or excluding lamp(s).
Light source LED Type of lamp that fits in the luminaire. In some cases, several types of lamps can be used in one luminaire.
Luminaire application Outdoor Application of the luminaire depending on the environment. For example, an indoor fitting cannot be used outdoors. An outdoor luminaire, on the other hand, could be used indoors, but may be less suitable here, fore example because it provides too much light or is aesthetically unsuitable.
Luminaire type Bolder Type of luminaire application.
Pieces per outer carton 1 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Suitable for number of lamps 1 The number of lights that the luminaire can contain. Most luminaires are supplied without lamps. If lamps are included can be found in filter property Lamp included.
Wattage 9,5W The power that the bulb consumes. This does not include the loss of any ballast or transformer.
EAN code 4024163300551 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
SLV 1008727 Ordi II Pole 70 Sensor LED bolderarmatuur sensor 9,5W 822+830 2200K+3000K zwart dimbaar
Downloads Your corrections
Remarks
Full name
Phone
Email address