37, 8, 372,
Nederlands Deutsch Francais English
0
   Cart

LED normaallamp A60 3W E27 230V met kunststof bol rood niet dimbaar IP54 in combinatie met afdichtring in prikkabel

Article ID:
14040611



Only 2 items currently in stock
Last stock




Properties
Average life span 15000h The life span of a party of lamps of which 50% of the lamps will continue to function. Sometimes, incandescent or halogen lamps may become defective more quickly, but in case 50% of the lamps do still reach the lifespan, the lamps are still OK.
Beam angle 360° The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area.
For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
Brand EGB If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Built-in motion detector No

Luminaire or lamp has a built-in motion detector. The light will switch on when a movement is detected.

Built-in twilight switch No

Luminaire or lamp has a twilight switch function. This automatically switches on the lights as it gets dark.

Colour code Red Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value:
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
The last 2 digits are for colour temperature.
The higher the colour temperature, the cooler the impression of light.
Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere.
Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light.
2700K extra warm white
3000K warm white
3500K neutral white
4000K cool white
5000-5500K daylight
6000K cool daylight
Colour temperature Red

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

Diameter 60mm Diameter in millimetres, measured at the widest point.
Dim to warm No

Dim to warm is a dimming technique that adjusts colour temperature as the light is dimmed: it shifts from warm white to extra warm white when fully dimmed. This technique has various names, such as Dimtone or Glowdim.

Dimmable No Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Lamp base E27 Cap, lamp holder or lamp base type.
Length 116mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Luminous flux 30lm The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
Material Plastic Material of which the major part of the product is made.
Number of switch cycles 7500 The life span of a lamp may be limited by the number of switch cycles, which is the number of times a lamp can be switched on and off before it becomes defective.
Pieces per outer carton 10 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Power factor >0,4 Power factor is the ratio between net power and apparent power. The PF is the value that indicates how efficiently electrical power is delivered to the consumer. Ideally, the PF is equal to 1. Anything below 1 means that additional power is required to deliver the desired power to the consumer.
Voltage 230V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Wattage 3W The power that the bulb consumes. This does not include the loss of any ballast or transformer.
LED normaallamp A60 3W E27 230V met kunststof bol rood niet dimbaar
IP54 in combinatie met afdichtring in prikkabel
Downloads Your corrections
Remarks
Full name
Phone
Email address