Philips MasterColour CDM-TC 70W 925 G8.5 EliteWarm Only use with EB (electronic ballast).
Properties
Downloads
Your corrections
| Manufacturer's article number | 20307000 | ? Manufacturer's part number. |
| Brand | Philips | ? If the product is unbranded, we do not have a regular supplier for it. Therefore, the product version may slightly vary. |
| Colour code | 925 |
?
Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value: 5 = 50-59 6 = 60-69 7 = 70-79 8 = 80-89 9 = 90-99 The last 2 digits are for colour temperature. The higher the colour temperature, the cooler the impression of light. Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere. Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light. 2700K extra warm white 3000K warm white 3500K neutral white 4000K cool white 5000-5500K daylight 6000K cool daylight |
| Colour rendering index Ra | >90 |
?
Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100. Ra = 90-100 excellent colour rendering properties Ra = 80-90 good colour rendering properties Ra = 60-80 moderate colour rendering properties Ra <60 poor colour rendering properties Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower. |
| Colour temperature | 2600K |
?
Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light: 2700K: extra warm white
Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
|
| Diameter | 15mm | ? Diameter in millimetres, measured at the widest point. |
| Dimmable | No | ? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department. |
| Electronic 10% failure after | 8000h | ? Number of hours with 10% of the lamps has been interrupted by application of an electronic (or HF) ballast. |
| Lamp base | G8.5 | ? Cap, lamp holder or lamp base type. |
| Length | 85mm |
?
Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated. |
| Luminous flux | 6500lm | ? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm). |
| Pieces per outer carton | 12 | ? Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount. |
| Wattage | 70W | ? The power that the bulb consumes. This does not include the loss of any ballast or transformer. |
| EAN code | 8718291203070 | ? EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing. |
| EAN code (extra) | 08718291203087 | ? EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing. |
Philips MasterColour CDM-TC 70W lamp colour 925 G8.5 Warm
Only use with EB (electronic ballast).
Ceramic metal halide discharge lamp in a warm colour temperature (2500K), with an excellent colour rendering index (CRI). Suitable for the use in super markets, bakeries and furniture shops.
Only use with EB (electronic ballast).
Ceramic metal halide discharge lamp in a warm colour temperature (2500K), with an excellent colour rendering index (CRI). Suitable for the use in super markets, bakeries and furniture shops.
Download productinformatieblad
