37, 8, 372,
Nederlands Deutsch Francais English
0
   Cart

Tinto CDM-Tm GU6.5 35W reflector WFL 40° en VWFL 75° inbouwarmatuur vast rond wit inclusief EPCOM/3 5kV connector op armatuur en losse connector voor naar vsa

Article ID:
20401032



Only 1 items currently in stock
Last stock




Properties
Manufacturer's article number 2.09.0253 Manufacturer's part number.
Ballast Exclusive A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Beam angle 45° The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area.
For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
Brand Lumiparts If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Colour White Most common colour in the product.
Connection power input EPCOM/3 chassis part male 5kV

The way the power can be connected.

Hole size Ø105mm The size of the hole you can build in the fixture.
Lamp base GU6.5 Cap, lamp holder or lamp base type.
Lamp included No Luminaire including or excluding lamp(s).
Light source CMH-TC GU6.5 Type of lamp that fits in the luminaire. In some cases, several types of lamps can be used in one luminaire.
Luminaire application Indoor Application of the luminaire depending on the environment. For example, an indoor fitting cannot be used outdoors. An outdoor luminaire, on the other hand, could be used indoors, but may be less suitable here, fore example because it provides too much light or is aesthetically unsuitable.
Luminaire type Ceiling recessed Type of luminaire application.
Outside dimensions Ø115mm Outside Dimension is the largest size, often of the lamp head.
Pieces per outer carton 1 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Recessed depth 63mm The required recessed height behind the luminaire. More space is often needed due to heat development and tilting of the luminaire.
Suitable for number of lamps 1 The number of lights that the luminaire can contain. Most luminaires are supplied without lamps. If lamps are included can be found in filter property Lamp included.
Wattage 35W The power that the bulb consumes. This does not include the loss of any ballast or transformer.
EAN code 2.09.0253 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
Tinto CDM-Tm GU6.5 35W reflector WFL 40° en VWFL 75° inbouwarmatuur vast rond wit
inclusief EPCOM/3 5kV connector op armatuur en losse connector voor naar vsa
Related items Downloads Your corrections
Remarks
Full name
Phone
Email address