Nederlands Deutsch Francais English
0
   Cart

Osram with reflector

Specific lamps for disco, photo, film and theater.
Is there a type missing, send an e-mail to verkoop@firstlight.nl for pricing.
Prices are exclusive of VAT.

Osram with reflector
Filters
Filter on:
Either show items that are in stock or items that are not in stock.
? The ANSI code on a lamp or device indicates that the product meets ANSI (American National Standards Institute) standards. ANSI is an organisation that develops standards for performance, dimensions and safety. Lamps with corresponding ANSI codes are interchangeable.
? The life span of a party of lamps of which 50% of the lamps will continue to function. Sometimes, incandescent or halogen lamps may become defective more quickly, but in case 50% of the lamps do still reach the lifespan, the lamps are still OK.
? If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
? Most common colour in the product.
? Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
?

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

? Diameter in millimetres, measured at the widest point.
? Cap, lamp holder or lamp base type.
? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
? This is the code on the lamp or appliance that the lamps meet the standards LIF. LIF stands for Lighting Industry Federation. This institute developed standards for performance, safety and dimensions. Lamps with a similar LIF code are interchangeable.
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
? This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
? The power that the bulb consumes. This does not include the loss of any ballast or transformer.
Length
>
>
? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Luminous flux
>
>
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).


21 products   1 2  


Philips 14501 150W 20V GX5.3 MR16 DDL

 

Expected 04-10-2025
You've viewed 21 of 21 items

21 products   1 2