Nederlands Deutsch Francais English
0
   Cart

Philips HID-PV m 35W/I EVSA met trekontlasting

Article ID:
29104442



New stock expected on:  
10-06-2026 After placing the order




Properties
Manufacturer's article number 8711500881724 Manufacturer's part number.
Manufacturer's article number (old) 89164500 Manufacturer's part number.
Average life span 40000h The life span of a party of lamps of which 50% of the lamps will continue to function. Sometimes, incandescent or halogen lamps may become defective more quickly, but in case 50% of the lamps do still reach the lifespan, the lamps are still OK.
Ballast Electronic A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Ballast version Surface-mounted with strain relief

Version of the ballast.

Brand Philips If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Dimmable No Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Height 34mm Maximum height in millimetres.
Ignition voltage 2,0kV Ignition voltage of the ballast or lamp in kV.
Length 234mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Material number (12NC) 913700653566 Material number from Philips
Pieces per outer carton 10 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Shape Oblong Product shape.
Suitable for CDM-R mini MR16 1x35W

Note Philips has an ignition voltage of 1.5 kV, General Electric and Sylvania 4kV, therefore these are not interchangeable. You can only use lamps with the specified wattage and number. Other combinations will not work.

Suitable for CDM-Tm Mini PGJ5 1x35W You can only use lamps with the specified wattage and number. Other combinations will not work.
Voltage 230V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Width 49,4mm Maximum width in millimetres.
EAN code 8711500881724 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) 08727900891645
1607951197
EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
Philips HID-PV m 35W/I EVSA met trekontlasting
Downloads Your corrections
Remarks
Full name
Phone
Email address