Nederlands Deutsch Francais English
0
   Cart

Philips HID-PV C 35 /S CDM 35W EVSA inbouwmodel

Article ID:
29102574



18 items currently in stock
New stock expected on:  
30-04-2026 After placing the order




Properties
Manufacturer's article number 8711500881687 Manufacturer's part number.
Manufacturer's article number (old) 85962100 Manufacturer's part number.
Application to LED driver Yes These lamps can be applied to an LED driver. Please note the manufacturer's specifications for the correct current value.
Ballast Electronic A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Ballast version Built-in ballast without strain relief

Version of the ballast.

Brand Philips If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Dimmable No Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Height 32mm Maximum height in millimetres.
Length 109mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Material number (12NC) 913700652766 Material number from Philips
Pieces per outer carton 12 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Shape Rectangular Product shape.
Suitable for CDM-R 1x35W You can only use lamps with the specified wattage and number. Other combinations will not work.
Suitable for CDM-R111 1x35W You can only use lamps with the specified wattage and number. Other combinations will not work.
Suitable for CDM-T 1x35W You can only use lamps with the specified wattage and number. Other combinations will not work.
Suitable for CDM-TC 1x35W You can only use lamps with the specified wattage and number. Other combinations will not work.
Suitable for CDM-TD 1x35W You can only use lamps with the specified wattage and number. Other combinations will not work.
Voltage 230V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Width 75mm Maximum width in millimetres.
EAN code 8711500881687 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) 08727900859621 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
Philips HID-PV C 35 /S CDM 35W EVSA inbouwmodel
Downloads Your corrections
Remarks
Full name
Phone
Email address