Nederlands Deutsch Francais English
0
   Cart

Philips DynaVision Programmable Xtreme HID-DV Prog Xt 250 SON C2 208-277V evsa

Article ID:
29101348



17 items currently in stock
New stock expected on:  
25-04-2026 After placing the order




Properties
Manufacturer's article number 8718291219910 Manufacturer's part number.
Manufacturer's article number (old) 21991000 Manufacturer's part number.
Ballast Electronic A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Ballast version Built-in ballast without strain relief

Version of the ballast.

Brand Philips If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Cable capacity output wires mutual 1000pF

Ballasts that include an ignitor to start the HID lamp are limited in the distance between ignitor / ballast and lamp. This capacity in pF may not be higher than the maximum value. A typical value for cable is 100pF/meter.

Dimmable Dali, AmpDim, ALO, CLO, Dynadimmer, Lineswitch Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Height 58mm Maximum height in millimetres.
IP protection degree IP34

The IP (Ingress Protection) code indicates the degree of protection against ingress of moisture and solid objects. The code consists of two firures.
The first figure indicates the protection against objects and dust:
IP 0x - not protected
IP 1x - protected against objects with a diameter above 50 mm
IP 2x - protected from objects with a diameter greater than 12 mm (touch safe)
IP 3x - protected from objects with a diameter greater than 2.5 mm
IP 4x - protected against objects with a diameter greater than 1 mm
IP 5x - protected against dust ( dust )
IP 6x - dustproof

The second figure indicats the protection against water:
IP x0 - unprotected (plain)
IP x1 - Protected against dripping water (drip)
IP x2 - Protected against dripping water when tilted to 15 degrees
IP x3 - protected against spraying water (rain tight)
IP x4 - protected against splashing water (splash proof)
IP x5 - protected against water jets (splashproof)
IP x6 - protected from rainstorms
IP x7 - protected against accidental immersion (30 minutes to 1 meter deep) (waterproof)
IP x8 - protected from stay under water (pressure proof)

Length 169mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Material number (12NC) 913700676766 Material number from Philips
Pieces per outer carton 6 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Shape Rectangular Product shape.
Suitable for SON 1x250W You can only use lamps with the specified wattage and number. Other combinations will not work.
Voltage 208V-277V This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
Width 100mm Maximum width in millimetres.
EAN code 8718291219910 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) 08718291219927 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
Philips DynaVision Programmable Xtreme HID-DV Prog Xt 250 SON C2 208-277V evsa
Downloads Your corrections
Remarks
Full name
Phone
Email address