Demco H.DEM-2.18/24M ballast TL-D PL-L suitable for 2xTL-D 15W, 18W or 1x30W, 36W and 38W, 2xPL-L 18W 24V DC direct current (20V-32V) 32V momentary
Properties
Downloads
Your corrections
| Manufacturer's article number | H.DEM-2.18/24M | ? Manufacturer's part number. |
| Ballast | Electronic | ? A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life. |
| Brand | Demco | ? If the product is unbranded, we do not have a regular supplier for it. Therefore, the product version may slightly vary. |
| Connection output | Tab 6,3mm (slide) |
?
Connection type of the output. |
| Connection power input | Tab 6,3mm (slide) |
?
The way the power can be connected. |
| Dimmable | No | ? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department. |
| Height | 32mm | ? Maximum height in millimetres. |
| Length | 195mm |
?
Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated. |
| Pieces per outer carton | 1 | ? Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount. |
| Shape | Oblong | ? Product shape. |
| Suitable for PL-L 4p | 2x18W |
?
Suitable for PL-L 4, L Dulux, Biax L, Lynx CF-L lamps. You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Suitable for TL 26mm | 1x18W, 1x30W, 1x36W, 1x38W, 2x15W , 2x18W | ? Suitable for TL-D, L Lumilux, T8 Polylux, Luxline T8 fluorescent tubes. You can only use lamps with the specified wattage and number. Other combinations will not work. |
| Voltage | 24V DC (direct current) | ? This may be either a fixed voltage or two values, in which case the product can be used within these limits. |
| Width | 35mm | ? Maximum width in millimetres. |
Demco H.DEM-2.18/24M ballast TL-D PL-L suitable for 2xTL-D 15W, 18W or 1x30W, 36W and 38W, 2xPL-L 18W
24V DC direct current (20V-32V) 32V momentary
24V DC direct current (20V-32V) 32V momentary
Download PDF/Demco tech.PDF
