Nederlands Deutsch Francais English
0
   Cart

Display luminaires



Prices are exclusive waste disposal fee.
Prices are exclusive of VAT.
Display luminaires
Filters
Filter on:
Either show items that are in stock or items that are not in stock.
? The life span of a party of lamps of which 50% of the lamps will continue to function. Sometimes, incandescent or halogen lamps may become defective more quickly, but in case 50% of the lamps do still reach the lifespan, the lamps are still OK.
? A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
? The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area.
For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
? If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
? Most common colour in the product.
? Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value:
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
The last 2 digits are for colour temperature.
The higher the colour temperature, the cooler the impression of light.
Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere.
Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light.
2700K extra warm white
3000K warm white
3500K neutral white
4000K cool white
5000-5500K daylight
6000K cool daylight
? Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
?

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

?

The way the power can be connected.

? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
? Maximum height in millimetres.
? Cap, lamp holder or lamp base type.
? Luminaire including or excluding lamp(s).
? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
? Type of lamp that fits in the luminaire. In some cases, several types of lamps can be used in one luminaire.
? Type of luminaire application.
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
? Material of which the major part of the product is made.
? Outside Dimension is the largest size, often of the lamp head.
? The number of lights that the luminaire can contain. Most luminaires are supplied without lamps. If lamps are included can be found in filter property Lamp included.
? The number of degrees that the fixture can be tilted vertically.
? This may be either a fixed voltage or two values​​, in which case the product can be used within these limits.
? The power that the bulb consumes. This does not include the loss of any ballast or transformer.
? Maximum width in millimetres.
Height
>
>
? Maximum height in millimetres.
Luminous flux
>
>
? The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
Width
>
>
? Maximum width in millimetres.

Luminaire application: Indoor

3 products     1  


Eurolite LED displaystraler 12W 3200K kleur 832 met klem zwart aansluitsnoer 1,5m met stekker

 

Expected 29-04-2026
SLV Dio flex GU10 wand opbouwarmatuur leverbaar in diverse uitvoeringen

 
SLV Display ADL GU10 wand opbouwarmatuur leverbaar in diverse uitvoeringen

 
You've viewed 3 of 3 items

3 products     1