Nederlands Deutsch Francais English
0
   Cart

Pivo Medium Philips fortimo SLM2000 LED spot draai- en kantelbaar 20W 4000K 2000lm 36° met LEDdriver wit

Article ID:
24601214



New stock expected on:  
19-04-2026 After placing the order




Properties
Manufacturer's article number 2.11.0973 Manufacturer's part number.
Ballast LED Converter A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Beam angle 36° The wider the light beam, the larger the illuminated surface. Brightness decreases as the beam widens, since the light is divided over a larger area.
For creating high contrasts it is therefore recommended to apply smaller light beams. However, contrasts that are too high can be distracting and can cause adjustment problems for the eye, which can be tiring. On the other hand, too little contrast creates a dull and flat impression.
Brand Lumiparts If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Colour White Most common colour in the product.
Colour code 840 Light colour is often represented with a 3 digit number. The first digit indicates the CRI (Colour Rendering Index) or CRI Ra value:
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
The last 2 digits are for colour temperature.
The higher the colour temperature, the cooler the impression of light.
Warm white creates a cosy, welcoming atmosphere. Neutral cool-white creates a more businesslike atmosphere.
Low lighting levels in interior must be obtained with warm-white light. If a very high level of light is needed, this must be achieved with neutral or cool white light.
2700K extra warm white
3000K warm white
3500K neutral white
4000K cool white
5000-5500K daylight
6000K cool daylight
Colour rendering index Ra >80 Light sources can be classified on the basis of their colour rendering properties. The unit for colour rendering is called CRI (Colour Rendering Index, or CRI Ra value). The scale of the Ra is from 50 to 100.
Ra = 90-100 excellent colour rendering properties
Ra = 80-90 good colour rendering properties
Ra = 60-80 moderate colour rendering properties
Ra <60 poor colour rendering properties
Fluorescent and PL lamps with an equal power, the luminous flux of Ra 90-100 tubes is typically 20% lower.
Colour temperature 4000K

Colour temperature is expressed in kelvin (K). The higher the colour temperature, the cooler the impression of the light:

2700K: extra warm white
3000K: warm white
3500K: neutral white
4000K: cool white
5000-5500K: daylight
6000K: cool daylight

Extra warm white creates a warm, inviting atmosphere (e.g. hotel, living room, and catering). Warm white can be used for a pleasant atmosphere (e.g. retail and office). Neutral cool white creates a more businesslike atmosphere, this color gives a sterile atmosphere.
Low lighting levels are obtained in interior with warm white light. If a very high level of light is needed, neutral or cool white light is a good choice.

Constant current 1050mA For constant current drive LED's are connected in series. The driver must be able to provide the appropriate current.
Dimmable No Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Height 112mm Maximum height in millimetres.
Hole size Ø154mm The size of the hole you can build in the fixture.
Lamp included Yes Luminaire including or excluding lamp(s).
Light source LED Type of lamp that fits in the luminaire. In some cases, several types of lamps can be used in one luminaire.
Luminaire application Indoor Application of the luminaire depending on the environment. For example, an indoor fitting cannot be used outdoors. An outdoor luminaire, on the other hand, could be used indoors, but may be less suitable here, fore example because it provides too much light or is aesthetically unsuitable.
Luminaire type Ceiling recessed Type of luminaire application.
Luminous flux 2000lm The amount of light transmitted by the light source per second. The unit of luminous flux is the lumen (lm).
Outside dimensions Ø168mm Outside Dimension is the largest size, often of the lamp head.
Pieces per outer carton 1 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Wattage 20W The power that the bulb consumes. This does not include the loss of any ballast or transformer.
EAN code 8720584021988 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
EAN code (extra) 2.11.0973 EAN code is the barcode of an article which is used worldwide as article code. The EAN code extra is the code from the extra packing.
Pivo Medium Philips fortimo SLM2000 LED spot draai- en kantelbaar 20W 4000K 2000lm 36° met LEDdriver wit
Accessories
Reflector 18° voor Pivo medium LED spot SLM module

 
Reflector 24° voor Pivo medium LED spot SLM module

 
Reflector 36° voor Pivo medium LED spot SLM module

 

Only 5 items in stock

Last stock
Reflector 60° voor Pivo medium LED spot SLM module

 
Downloads Your corrections
Remarks
Full name
Phone
Email address