Nederlands Deutsch Francais English
0
   Cart

HEP LNDC15W700NLRP-T2CH NFC 125-700mA LEDdriver DALI 2 DT8 dimbaar 2 kanalen inbouw met bedrading uitgangsstroom instelbaar met NFC, de uitgang is alleen 2 x 2 draads te gebruiken (niet 3 draads)

Article ID:
29102906



New stock expected on:  
14-09-2026 After placing the order




Properties
Manufacturer's article number LNDC15W700NLRP-T2CH Manufacturer's part number.
Ballast LED Converter A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.
Ballast version With wiring

Version of the ballast.

Brand HEP If the product is unbranded, we do not have a regular supplier for itTherefore, the product version may slightly vary.
Connection output 1 x cord 0,2m Connection type of the output.




Connection power input 1 x cord

The way the power can be connected.

Connection power output No The way the power can be tapped for looping through.
Dimmable DALI-2 DT8 Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.
Height 32mm Maximum height in millimetres.
Input voltage 220V-240V
This may be a fixed voltage or two values ​​with a hyphen.
You can use the product within these limits.
Length 80mm Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.
Ouput current 125-700mA Each type of LED requires a different driver. Current-controlled LEDs of 350, 700, 1050 and 1400mA need to be connected in series. This can be easily done with an LED distributor. Unused outputs are shorted with a wire . First connect the wires, then you can put power on! Never disconnect wires under power!
Pieces per outer carton 56 Number of pieces per outer carton. To order full boxes of the item, please add it to your shopping basket in multiples of this amount.
Power factor 0,9 Power factor is the ratio between net power and apparent power. The PF is the value that indicates how efficiently electrical power is delivered to the consumer. Ideally, the PF is equal to 1. Anything below 1 means that additional power is required to deliver the desired power to the consumer.
Shape Rectangular Product shape.
Width 55mm Maximum width in millimetres.
HEP LNDC15W700NLRP-T2CH NFC 125-700mA LEDdriver DALI 2 DT8 dimbaar 2 kanalen inbouw met bedrading
uitgangsstroom instelbaar met NFC, de uitgang is alleen 2 x 2 draads te gebruiken (niet 3 draads)
Downloads Your corrections
Remarks
Full name
Phone
Email address