> LED lighting > LED drivers and power supplies > LED driver for 480mA LED

LED driver for 480mA LED

Prices are exclusive of VAT.

Filters

Filter by:

? Either show items that are in stock or items that are not in stock.

? A conventional ballast has a wound coil. It is somewhat cheaper to buy, but more expensive to run because more power is converted into heat. An electronic ballast not only has a lower power consumption, but it also has the advantage of longer lamp life.

Version of the ballast.

? If the product is unbranded, we do not have a regular supplier for it. Therefore, the product version may slightly vary.

? Most common colour in the product. When it comprises multiple colours, these are included in the description, separated by a slash (/).

? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.

? Glass colour.

? Maximum height in millimetres.

This may be a fixed voltage or two values with a hyphen.
You can use the product within these limits.

? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.

? Each type of LED requires a different driver. Current-controlled LEDs of 350, 700, 1050 and 1400mA need to be connected in series. This can be easily done with an LED distributor. Unused outputs are shorted with a wire . First connect the wires, then you can put power on! Never disconnect wires under power!

? Product shape.

? Maximum width in millimetres.

Height

? Maximum height in millimetres.

Length

? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.

Width

? Maximum width in millimetres.

Show all filters

Show less filters