LED driver for 1500mA LED

Prices are exclusive of VAT.

Filters

Filter by:

? Either show items that are in stock or items that are not in stock.

Version of the ballast.

? If the product is unbranded, we do not have a regular supplier for it. Therefore, the product version may slightly vary.

? Most common colour in the product. When it comprises multiple colours, these are included in the description, separated by a slash (/).

? Connection type of the output.

The way the power can be connected.

? The way the power can be tapped for looping through.

? Dim type: AM, PWM or hybrid.

? Some lamps and ballasts are dimmable. There are different types of dimmers and different ways to dim a ballast or transformer. In case of insufficient knowledge, please check with our sales department.

? Maximum height in millimetres.

This may be a fixed voltage or two values with a hyphen.
You can use the product within these limits.

The IP (Ingress Protection) code indicates the degree of protection against ingress of moisture and solid objects. The code consists of two firures.
The first figure indicates the protection against objects and dust:
IP 0x - not protected
IP 1x - protected against objects with a diameter above 50 mm
IP 2x - protected from objects with a diameter greater than 12 mm (touch safe)
IP 3x - protected from objects with a diameter greater than 2.5 mm
IP 4x - protected against objects with a diameter greater than 1 mm
IP 5x - protected against dust ( dust )
IP 6x - dustproof

The second figure indicats the protection against water:
IP x0 - unprotected (plain)
IP x1 - Protected against dripping water (drip)
IP x2 - Protected against dripping water when tilted to 15 degrees
IP x3 - protected against spraying water (rain tight)
IP x4 - protected against splashing water (splash proof)
IP x5 - protected against water jets (splashproof)
IP x6 - protected from rainstorms
IP x7 - protected against accidental immersion (30 minutes to 1 meter deep) (waterproof)
IP x8 - protected from stay under water (pressure proof)

? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.

? Each type of LED requires a different driver. Current-controlled LEDs of 350, 700, 1050 and 1400mA need to be connected in series. This can be easily done with an LED distributor. Unused outputs are shorted with a wire . First connect the wires, then you can put power on! Never disconnect wires under power!

? Product shape.

? Maximum width in millimetres.

Height

? Maximum height in millimetres.

Length

? Product length in millimetres. For fluorescent tubes, this excludes the metal pins on the end unless otherwise stated.

Width

? Maximum width in millimetres.

Ballast: LED Converter

Show all filters

Show less filters